1969-72 GM Rotor to Mustang II Spindle Inner Bearing Seal

Speedway is the only place that has it.

Thanks to Speedway I was able to get the correct seals for this project.

Exactly what I needed

Great quality

Too large, hard to seat, proprietary part

Received these in the brake kit for my mustang 2 conversion. Speedway Motors | #91031943. Had to order another set that hopefully work. Disappointing and not sure the others will work as it is a proprietary seal not available at auto parts store per instructions.

Updated review

Just updating my initial review. Ordered another set and Speedway quickly refunded my money. Got the new seals and really took my time being careful not to f-up the seals. Like most seals in the past I was able to just line it up then use a small block of wood and tap it in but this was not the case 1st time around. This time I used a light coat of white lithium grease around the seal and SLOWLY/gently tap the seal in. All is right in the world now haha - thanks again Speedway for making it right.

Does not fit

As stated before - the seal is too BIG. It will catch the edge and start binding/ruining the seal. Been replacing seals/bearings for 20+ years and have never seen a more terrible fit than this. I ordered the Mustang II to GM hub conversion and these terrible fitting seals came with the kit. Extremely disappointed.

I would buy this again

Worked great with the mustang front end

it was free because all the mistakes they made .

hopefully it fits

Works great

Ordered two more for spares

dont fit.

Even with a seal driver make sure you take your time and tap it in all the way around because otherwise being how the big the seal is on the outsite it will bind and be wrecked.