AFCO 40000 GM 1968-72 Chevelle Replacement Front Frame Kit

#10640000

AFCO 40000 GM 1968-72 Chevelle Replacement Front Frame Kit

Name: AFCO 40000 GM 1968-72 Chevelle Replacement Front Frame Kit
Brand: AFCO
SKU: 10640000
Price: 1499.99 USD
Availability: InStock
Rating: 5 (1 reviews)

1 Review

3 Questions

Approved by IMCA, WISSOTA, USRA, USMTS, DIRTcar, and most other major sanctioning bodies
Perfect platform for new builds or repairs of Modifed or Sport Mod chassis
Material is the same grade and thickness as the OEM frame and welds very consistent

$1,499.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

68-72 Chevy Chevelle, Modified, Sport Mod, Steel

Approved by IMCA, WISSOTA, USRA, USMTS, DIRTcar, and most other major sanctioning bodies
Perfect platform for new builds or repairs of Modifed or Sport Mod chassis
Material is the same grade and thickness as the OEM frame and welds very consistent
Chevelle front stub assembly is both easy and consistent due to the locating tabs having built-in stops for alignment
Cross member has clearance built in the back side for radiator placement and in the front side for steering components

See more details

Key Specs

MFG. Part #	40000
Brand	AFCO
Position	Front
Material Type	Steel
Finish	Natural

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

AFCO 40000 Details

The AFCO 40000 Dirt Modified replacement Chevelle frame kit is engineered for dirt track racing and follows OEM specifications. The kit design allows circle track chassis builders to reduce their build time by over 50%. In testing, AFCO found that it takes significantly less time to build this frame kit than utilizing an OEM chassis.

Approved by IMCA, WISSOTA, USRA, USMTS, DIRTcar, and most other major sanctioning bodies
Perfect platform for new builds or repairs of Modifed or Sport Mod chassis
Material is the same grade and thickness as the OEM frame and welds very consistent
Chevelle front stub assembly is both easy and consistent due to the locating tabs having built-in stops for alignment
Cross member has clearance built in the back side for radiator placement and in the front side for steering components
Cross member has been lowered on the left upper side for steering shaft clearance
Crossmember has 5/16" locating holes on the lower section for correct indexing of horn placement for easy fitment
Front horns have been notched in the spring pocket area for ease of spring changes
Allows the stamping to be stronger in the spring pocket area, as the metal is not pulled in different areas as the factory frames are
The horns and the rear lower control arm mounts have two 5/16" locating holes to locate the correct rear control arm placement
GM replacement frame rails have locating tabs for easy placement to frame horns
The weight of the AFCO frame is the same as the factory OEM frame with the same cuts
Replacement individual right and left horns and right frame rails are available for crash repair
Saves up to 6 hours of build time
Locating tabs for easy assembly
Excellent drag link and radiator clearance
Factory steering bolts directly on to this Chevelle front clip
Pre-cut spring pockets

Note: Not for street use. This frame is for Dirt Modified or Sport Modified racing use only. No provisions for factory GM A-body springs, front bumper mounts, etc.

Charts

AFCO 40000 Brochure (PDF)

Guides & Documents

Frame Rails Technical Information (10640000)

Warranty Information

Speedway Motors cannot facilitate the return of defective Afco products as they have requested to handle these directly with the consumer. For defective product support and Return Authorization, please contact Afco at +1 (800)-632-2320.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

AFCO 40000 Specifications

KEY SPECS
MFG. Part #	40000
Brand	AFCO
Position	Front
Material Type	Steel
Finish	Natural

GENERAL
Sold in Quantity	Kit

Ratings & Reviews

1 Review

Write A Review

1 reviews

Filter by Ratings

Sort Reviews

I would definitely order this part again!

5.0

4 years ago

Mr. Saturday

Evansdale Iowa

Verified

We are using this part on our new modified and it was perfect out of the box and arrived when I was told it would. Way easy to install and weld yogether

Would Recommend

Showing 1 of 1 reviews

Questions & Answers

3 Questions • 3 Answers

Sort Questions

How come the stub frame pieces want work for a stock replacement on a 1972 Chevelle frame, what's the difference?

by Ty

• 7 years ago

1 answer

View Answer

How much does the frame weigh?

by Chase

• 8 years ago

1 answer

View Answer

How to upper and control arms mount and locate.

by Eric

• 9 years ago

1 answer

View Answer

3 of 3 questions shown

Fitment

1968-1972 Chevy Chevelle