1963-72 Chevy C10 Front and Rear Suspension Kit

Front Suspension

Turn your C10 Chevy truck into one of the best looking and best handling trucks at the truck show with this new 1963 - 1972 C10 Chevy Truck Custom Independent Front Suspension from Total Cost Involved. This kit will support a 5/7 drop vehicle stance and a dropped crossmember to give your C10 a Pro-Touring or lowrider look and style. This bolt-on custom independent front suspension comes with RideTech Coil-Overs and Engineered for ½ ton trucks only. This front suspension kit is engineered for Standard Street, Autocross and Pro Touring applications and is proudly made in the USA.

Kit includes:

• New - TCI Engineering Modular Custom Truck Spindle 
• New - 5” Drop Bolt on IFS
• New - Heavy Duty Upper Truck Control Arms 
• New - Heavy Duty Lower Truck Control Arms 
• RideTech – 5” Stroke Single Adjustable Coil-Over Shocks & Powder Coated Springs 
• Engine Stands Accept Small Block, Big Block & LS Engines 
• Energy Suspension - Polyurethane Greasable Bushings
• Moog - Upper & Lower Ball Joints 
• New - Reinforced 3/16” Thick Crossmember using Our One Piece Lower Control Arm Pin Design 
• Bolt-on Sway Bar 
• 12" Vented Rotors & Big Bore Calipers 
• The Spindles Come Assembled Using Hi-Temp Grease 
• All Mounting Hardware Included 
• Detailed Instruction Manual

NOTE:  Shown with optional Wilwood brake upgrade (83514010775DR or 83514010775D) installed on passenger’s side. Standard brake (included) shown on driver’s side.

 

Rear Suspension

Improve the handling of your 1963-1972 Chey C10 with this rear suspension kit from Total Cost Involved. This suspsension kit will give your truck a lower stance, lower the crossmember approximately 5" which will give your truck a better center of gravity with less body roll. This kit will give you more controlled handling by the coil-over shocks and the rear sway bar with no suspension binding variables. True bolt-in system that requires no cutting in the truck bed makes for easy installation. (Cutting of the rail for C-Notch is required.) This kit utilizes multiple shock mounting points to further reduce installation time and possible installation error. This rear suspension kit is engineered to work seamlessly with most aftermarket rear mounted gas tanks. This kit is proudly made in the USA and is all heli-arc welded for the highest quality and strength.

Kit includes:

• RideTech– 5” Stroke Single Adjustable Coil-Over Shocks 
• Energy Suspension - polyurethane greasable bushings
• Bolt-on Torque Arm Differential Plate for multiple rear end applications
• 1-1/2” x .156w U.S. DOM Trailing Arms with adjustable & greasable 2” Johnny Joints
• Heavy Duty Rear Coil-Over Crossmember and brackets
• Lowered stance and center of gravity
• Greasable urethane bushings
• Dramatically improves handling and braking
• Rear Coil-Over Torque Arm Suspension
• 1-1/4” x .120w U.S. DOM Panhard Bar 
• Bolt-on Axle Mounted Sway Bar (optional)
• Bolt-on C-Notch Plate 
• Black Powder Coated Springs
• Greasable Urethane Bushing
• RideTech - Coil-Over Shocks
• Detailed Installation Manual

Note:  Vendor Show Package shown in photo - powder coating is not included.  Brakes, rear axle housing and frame rails are shown for reference only and are not included as part of kit contents.