|
#91034925
$307.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
55-57 Chevy, Left and Right Position, 10 degree Angle
| Position | Left and Right |
| Spindle Style | Chevy/GM Custom |
| Spindle Drop | 2 Inch |
| Brake System Type | Disc |
| Angle | 10 degree |
Need help?
855.313.9176Quick and Easy Returns
Return Policy1955-57 Chevy 2" dropped spindles for use with aftermarket disc brake conversion kits.
Ideal for use in conjunction with the following Wilwood brake kit for Heidts Tri-5 drop spindle application:
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91034925 |
| Brand | Speedway Motors |
| Position | Left and Right |
| Spindle Style | Chevy/GM Custom |
| Spindle Drop | 2 Inch |
| Brake System Type | Disc |
| Angle | 10 degree |
| Material Type | Steel |
| Snout Material | Steel |
| Finish | Natural |
| Color | Natural |
| King Pin Included | No |
| Mounting Bolt Center to Center | 3.13" |
| Suspension Height Adjustment | Lowered |
| GENERAL | |
| Outer Bearing Surface O.D. | 0.84" |
| Inner Bearing Surface O.D. | 1.25" |
| Seal Friction Surface O.D. | 2" |
| Spindle Pin Length (Inside Bearing) | 0.95" |
| Spindle Pin Length (Outside Bearing) | 3.1" |
| Spindle Pin Length (Overall) | 4.06" |
| Thread Pitch | 3/4"-20 |
| Sold in Quantity | Pair |
| Notes | Ball joints mount through the top, on both top & bottom ball joint mount bosses. Backing plate and steering arm mount holes are 3/8" and top mount is 3-1/8" C to C, bottom mount is 4" C to C." |
4.8
5 Reviews
Customers find the product to be of high quality and very practical. They commend its perfect fit and ability to effectively mount a new brake system, indicating its usability. Its well-crafted structure is praised, reflecting its superior material quality. Despite rough casting, customers appreciate that it preps well for paint, which speaks to its convenient features. Users have repeatedly purchased the product, indicating their satisfaction and preference over competitors.
4.8
5 reviews
5
4
4
1
3
0
2
0
1
0
Filter by Ratings
100% I would buy this product again
5.0
6 months ago
210 chevy
Peoria,Az
Verified
Easy Insulation looks sharp. I also bought the Willwood brake system that goes with it, easy install
Would Recommend
yes a Another Great Item from Speedway!
5.0
2 years ago
CarGuy
Glendale, AZ
Verified
worked Great for my 57 Chevy!
Would Recommend
Great buy
5.0
6 years ago
Steve
Corpus Christi, Texas
Verified
Installed these to mount new will wood brake system. Worked perfectly.
Would Recommend
spindles
5.0
7 years ago
ducky
mn.
Verified
seems like a well built product.
Would Recommend
Good product third set I have purchased
4.0
9 years ago
Old car guy
McAlester Ok
Verified
Good product fits well casting is rough but 20 min with surface prep it is ready for paint
Would Recommend
Showing 5 of 5 reviews
3 Questions • 3 Answers
We have stock 1956 spindles on the car already with a disk brake conversion already on the car. How can I tell if these will work with our disk brakes?
by Chris
• 8 years ago
1 answer
View Answer
Will these 2" drop spindles work with the stock drum brakes?
by Antonio
• 9 years ago
1 answer
View Answer
I have a set of these or ones that look like these and have never seen where I could get a pair of caliper brackets. Do you have some and where do I look? Thanks
by Ben
• 10 years ago
1 answer
View Answer
3 of 3 questions shown
1955-1957 Chevy Bel Air
1957 Chevy Del Ray
1955-1957 Chevy Nomad
1955-1957 Chevy One-Fifty Series
1955-1957 Chevy Sedan Delivery
1955-1957 Chevy Two-Ten Series
