|
#91074754
$109.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Many Transmissions, 1.5" Tube O.D., 3" Drop, Steel
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91074754 |
| Brand | Speedway Motors |
| Overall Length | 33.5" |
| Drop | 3" |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Tube O.D. | 1.5" |
| Sold in Quantity | Each |
4.8
26 Reviews
Customers highly rate the product for its excellent fit and superb quality. The product is praised for its strong and durable material that ensures it stands the test of time. It comes in bare metal, providing users the liberty to paint it according to their preference. Its functionality and practicality have not gone unnoticed; it's easy to install with minimal modification required, allowing for easy transmission changes in future. It fits well within stock frame rails and lines up perfectly to support transmissions. Recommendations suggest that this product is worth buying again due to its problem-solving capacity and user-friendly attributes.
4.8
26 reviews
5
22
4
3
3
1
2
0
1
0
Most Liked Positive Review
4.0
Decent prebuilt option. Modifications needed for my build.
I'll preface with the obvious "every build is different". 1949 3100. Stock frame. This crossmember was too much drop to mount to bottom of frame so modification was made to allow it to sit inside the frame, and up about an inch. The crossmember could be 1/4" narrowed and would be more versatile. The crossmember fit with the underfloor vac assist brake master cylinder
Most Liked Negative Review
3.0
this conversion worked great!
supports my T5 manual trans in place on my 1946 Ford 1/2 ton pick up with T5 trans conversion
Filter by Ratings
Great product
5.0
16 days ago
Mcsports
Ky
Verified
Works great
Would Recommend
Decent prebuilt option. Modifications needed for my build.
4.0
3 months ago
Ben
Tx
Verified
I'll preface with the obvious "every build is different". 1949 3100. Stock frame. This crossmember was too much drop to mount to bottom of frame so modification was made to allow it to sit inside the frame, and up about an inch. The crossmember could be 1/4" narrowed and would be more versatile. The crossmember fit with the underfloor vac assist brake master cylinder
Would Recommend
Exceptional design
5.0
4 months ago
Dad's 50
Glenrock WY
Verified
Installed on custom 50 chevy pickup with TKX 5 transmission, was well thought out custom cross member, fit within chassis, bends allow for exhaust clearance, I did have to build 1.5 inch risers for connecting to frame but that was expected for my particular set up, speedway motors has been a good partner in my parts need!
Would Recommend
Quality product
5.0
a year ago
Eric
Dallas
Verified
Holes pre drilled for frame rail mounts and hardware included. Raw finish ready for coating.
Would Recommend
Perfect fit
5.0
a year ago
John
Boston MA
Verified
Was able to install a 4L60E transmission and an LS motor in my 1954 Chevy 3100
Would Recommend
Nice Welds
4.0
2 years ago
Beej
Lexington, KY
Verified
Installing a T5 conversion into my '51 AD and decided to go ahead and install a support while under there for an extra $150 and hour of work....Unsure of fit at the moment but the quality is top notch with very good welds. My needs are not critical for this item, so I am happy with what it is.
Great product, highly recommend
5.0
2 years ago
Wnc c10 shop
Canton North Carolina
Verified
Great product fits as it should, welds are of good quality and care was taken when assembled.
Would Recommend
Great product, I would buy this again.
5.0
2 years ago
Mike
Florence, MS.
Verified
Putting TH400 transmission in 52 Chevy pickup and this allowed me to relocate the cross member to exactly where I needed it to be.
Would Recommend
Well made, good fit.
5.0
2 years ago
Franks Garage
Maryland
Verified
Used the mount for my 52 chevy truck build.
Would Recommend
Fit great!
5.0
3 years ago
Farmer
Indiana
Verified
Fit great!
Would Recommend
Showing 10 of 26 reviews
17 Questions • 17 Answers
Will this work without cutting the floors and adding a hump?
by George
• 2 years ago
1 answer
View Answer
Does this use a tranny mount and if so what mount is recommened? Or does the tranny bolt right to the cross member?
by Mikey
• 2 years ago
1 answer
View Answer
Will the crossmember work for a 4l80e transmission?
by chucky
• 7 years ago
1 answer
View Answer
I have a 1954 Chevy pickup that has a 327 sbc and will be replacing the 4 spd granny with a t5 out of a v6 s10. Will this crossmember work on this ?
by Gus
• 8 years ago
2 answers
View Answers
Do they make a transmission crossmember that works when you install a frame mount brake booster. The booster hang down below the frame so unless a crossmember drop below it won't work.
by Butch
• 8 years ago
1 answer
View Answer
Will this crossmember work with the Tremec T56
by Jason
• 9 years ago
1 answer
View Answer
Can this be installed with the cab installed?
by Chad
• 9 years ago
7 answers
View Answers
How much of a drop is in the crossmember?
by Dave
• 10 years ago
1 answer
View Answer
Is this crossmember compatible with a 4L80E transmission?
by 49'er
• 11 years ago
1 answer
View Answer
will this fit a 3 speed saginaw? thank you for your answer!
by blkbrd51
• 11 years ago
1 answer
View Answer
10 of 17 questions shown
