Speedway 1938-39 Lincoln Zephyr LED Tail Lights
Speedway 1938-39 Lincoln Zephyr LED Tail Lights
Speedway Motors

|

#91137003

Speedway 1938-39 Lincoln Zephyr LED Tail Lights

  • These 38-39 Zephyr LED tail lights are flat on the back side making them an easy installation on nearly any flat panel
  • Installation is made simple by drilling three 1/4" holes - two for the mounting studs and a center hole for the wiring
  • These lights combine tail lights, brake lights, and turn signals in one light per side of the vehicle
See More

$158.99

/pair

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Complete Assembly Tail Light Component, LED Bulb Type

  • These 38-39 Zephyr LED tail lights are flat on the back side making them an easy installation on nearly any flat panel
  • Installation is made simple by drilling three 1/4" holes - two for the mounting studs and a center hole for the wiring
  • These lights combine tail lights, brake lights, and turn signals in one light per side of the vehicle
  • Base gasket included to prevent marring the paint and provide a factory looking installation
  • Featured on Season 4 of Car Masters: Rust to Riches; the Zephyr Gotham Garage Build
See more details

Key Specs

Tail Light ComponentComplete Assembly
PositionDriver and Passenger Side
Bulb TypeLED
Lens MaterialPlastic
Housing MaterialSteel
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91137003 Details

These tail lights are flat on the back for easy mounting to most any surface, as each only needs 3 holes (1/4" Diameter) drilled in the mount surface. Wired for tail light, stoplight, and turn signals. 12V. Includes base gasket.

  • Ground - Green
  • Tail - Black
  • Stop - Red (Pulses)
  • Turn - Yellow

Specs

21 LEDs

Speedway Motors 91137003 Specifications

KEY SPECS
MFG. Part #91137003
BrandSpeedway Motors
Tail Light ComponentComplete Assembly
PositionDriver and Passenger Side
Bulb TypeLED
Lens MaterialPlastic
Housing MaterialSteel
GENERAL
OEM ReplacementNo
Lens ColorRed
Bezel FinishChrome
Voltage12 volts
Overall Width3.38"
Overall Height7.30"
Center to Center3.55"
Gasket(s) IncludedYes
Hardware IncludedYes
Sold in QuantityPair

Ratings & Reviews

4.9

44 Reviews

Overall Assessment

Customers highly recommend our product, praising its fitting, beautiful chrome finishes, high-quality built, and easy installation. Many find our tail lights aesthetically pleasing and superior to original or previous replacements. Accolades include their easy wired layout, vivid brightness, and secure mounting system, ensuring safety and durability. They also mention the LED triple flash and the polished stainless trim. The flat back feature and the included gasket and attachment bolts add to the practicality, making it user-friendly. The period-correct design is also lauded, adding a stylish touch to vehicles. They are brighter and more visible than standard lights, even in bright sunlight, enhancing safety.

Write A Review

4.9

44 reviews

5

40

4

4

3

0

2

0

1

0

Filter by Ratings

Awesome pair of lights

5.0

16 days ago

Blownhemi

Edmond, Ok

Verified

Installed on a Harley Softail Deluxe Custom. Extremely bright, chrome is nice quality

Would Recommend

Great lights! Highly recommend!!

5.0

17 days ago

Gigi

Oklahoma

Verified

I put them on my wife's Harley Softail deluxe stretched bags for extra visibility with style! They work and look really good!

Would Recommend

Beautiful tail lights !!

5.0

10 months ago

Baby Huey

NW Orygun

Verified

I'm building a T roadster and I'm using these tail lights .

Would Recommend

Customer review image

Kdkostal@gmail.com

5.0

11 months ago

Elvis

Ohio

Bought these for a 32 chevy and looks great! Very fast shipping

Would Recommend

Yes

4.0

a year ago

Robin

Ormond Beach Fl

Verified

On our AV8 project . Wanted them instead of 39 Ford

Would Recommend

I think these lights would work on just about any 30,s or 40

5.0

a year ago

MIT

WI

Verified

These larger style lights work perfectly with the extra wide rear fenders I bought from you folks for my 33 chev. Although I was doing my research in February and March and the pair of lights were $135.00 but when I bought them in April they were $145.00. It looks like you guys got out in front of the tariffs.

Would Recommend

Look amazing

5.0

a year ago

1926 ford model t

Canada

Verified

Looks great on my 1926 ford

Would Recommend

Yes I would buy this product again it looks great

5.0

a year ago

Stitch - upholstery guy

Iowa

Verified

A new build 1932 Ford 3 window coupe looking for some tail lights and I think these are going to be perfect

Would Recommend

I would buy again

5.0

2 years ago

Lambert

Prior Lake MN

Verified

Yes on my 34 Ford Coupe

Would Recommend

Good Quality Tail lights

5.0

2 years ago

EricG81

Salt Lake City

Verified

I put these on my 1969 beetle. I did need to add some resistors from OSRAM to allow the turn signals to function. You will need two resistors, one for each side. You then place one wire of the resistor on the turn signal wire of the light and the other end on the ground wire of the lights.

Would Recommend

Load More Reviews

Showing 10 of 44 reviews

Questions & Answers

12 Questions • 13 Answers

I got the Speedway 1938-39 Lincoln Zephyr LED Tail Lights from you guys and the Dummy Load Resistors for LED Lights, 12 Volt Part # 91003030 I have a 29 hot rod dropped and chopped I am going to be using a Painless wiring kit and my steering column has the built-in turn signal switch. I want to wire this prior to installing in my fuel tank, then it will be a pain to get back there. I don't need the brake lights to flash on press... My concern is trouble lights? Also, where do I put the dummy load... Light options: Ground - Green Tail - Black Stop - Red (Pulses) Turn - Yellow So according to the PDF instructions on the dummy load resistor page... Do I need to put the load on the Turn (Yellow) to the Ground (Green)? Thanks, Dave

by Gangster

• 7 years ago

1 answer

View Answer

what tail lights are available that can use a 1154 6 volt bulb ?

by charlie

• 8 years ago

1 answer

View Answer

can the 911-37003 tail light be converted to 6 volt by changing to a 1154 bulb ?

by charlie

• 8 years ago

2 answers

View Answers

i bought your 12 circuit wire harness ( part number 91064017 ) and i also bought your 38-39 Lincoln Zephyr tail lights ( part number 91137007 ) i can't seem to get them to work right is there a special way to wire them up !!! i have checked the harness from front to back !!! the turn signals don't flash and the emergency flasher won't flash what the heck am i doing wrong ??? thank you for your time Bill

by butch

• 8 years ago

1 answer

View Answer

Do I need some type of controller to use the flash stop feature?

by Dave

• 8 years ago

2 answers

View Answers

The lens in apparently 3 portions with separate lights in each area. Which area[s] have the stop lights, turn indicator light[s], and normal running light[s]

by Love my Dyna Low Rider

• 10 years ago

1 answer

View Answer

I am thinking about getting these to flush mount on saddlebags on a motorcycle. I currently have a run/tail/brake controller installed that converted my rear turn signals to running and turn signals. The brake and turn signals already flash 3 times when brake is activated. Will these work with the R/T/B controller?

by Spud

• 11 years ago

1 answer

View Answer

would these fit 1939 ford coupe

by deborah

• 11 years ago

1 answer

View Answer

What is the distance between the two mounting studs?

by KingKong1

• 13 years ago

1 answer

View Answer

I have a 3 wire system this one has a 4 wire. Can I use this one? If so how would it wire?

by Jimmy

• 14 years ago

2 answers

View Answers

Load More Questions

10 of 12 questions shown

Fitment

    Customer Impersonation Script