|
#91612001
$68.99
/set
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select an engine to verify Fitment
Select Engine
Stainless Steel, Polished, 16.250" Overall Length
| MFG. Part # | 91612001 |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Finish | Polished |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese polished stainless steel tubes accommodate spark plug wires up to 7 mm. They attach to the intake manifold of 1937-1948 flathead Ford V8's while keeping your plug wires neat and organized.
Note: Looms will not work with '49-'53 heads as they will hit the thermostat housing.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91612001 |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Finish | Polished |
| GENERAL | |
| Sold in Quantity | Pair |
| Notes | Will not work with '49-'53 heads as they will hit the thermostat housing. |
| Overall Length | 16.250" |
| Inside Diameter | .310" |
4.8
12 Reviews
Customers have praised the product for its high quality, easy installation, and performance-enhancing features. The wire looms are well-constructed and offer practical organization for engine wires. Users confirm they fit 7mm wires neatly, attributing to a clean and professional-looking engine bay. They report that these looms significantly improve the appearances of their engines while replacing old, rusty parts. The product also stands out for its fit with a range of engines, including flatheads and v8s, reaffirming its versatility. Users highly recommend the product, often expressing intentions to repurchase.
4.8
12 reviews
5
10
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
Another quality product from Speedway
The product was quality made and fitted on the flathead V8 Ford as it should, Speedway motors certainly have a great variety of products to suit the old type cars but sometimes we search for with no luck in other sites
Most Liked Negative Review
3.0
As described
Fast shipping and a well built product. My only complaint is that they don't mount straight with motor
Filter by Ratings
Another quality product from Speedway
5.0
3 months ago
Hutcho
Australia
Verified
The product was quality made and fitted on the flathead V8 Ford as it should, Speedway motors certainly have a great variety of products to suit the old type cars but sometimes we search for with no luck in other sites
Would Recommend
I would buy this again if needed.
5.0
9 months ago
Humpy
Willits Ca.
Verified
Used it for what it is designed
Would Recommend
Good quality, good fit
5.0
2 years ago
clipkarn
Niceville, FL
Verified
Much better looking and likely much more efficient than the stock looms.
Would Recommend
Yes
5.0
3 years ago
Gene
Boring Or
Verified
Very good it was easy to install
Would Recommend
As described
3.0
4 years ago
Doodler
Los Angeles
Verified
Fast shipping and a well built product. My only complaint is that they don't mount straight with motor
I looks great on my 1948 v8 flathead engine
5.0
5 years ago
dusty
Compton
Verified
it was easy to set up on the engine
Would Recommend
Clean and nice looking wire looms built to last!
5.0
5 years ago
Shane
Cartersville GA
Verified
These wire looms worked great for the 7mm plug wires I bought. They really make the engine bay look clean and neat without being too blingy.
Would Recommend
Yes, absolutely
5.0
5 years ago
Megs
British Columbia
Verified
Installing on my 239 flattie to replace stick black rusty units.
Would Recommend
Would buy this item again
5.0
7 years ago
B-55
Reno,NV.
Verified
These wire Looms make it easy to install the plug wires in an orderly fashion on a flathead with a crab distributer.
Would Recommend
Great item
5.0
8 years ago
will
IL
Verified
Looks great
Would Recommend
Showing 10 of 12 reviews
2 Questions • 2 Answers
Will the left side loom clear the coil and coil mount on a 59AB where the coil is mounted with the first two bolts on the intake?
by Sid
• 7 years ago
1 answer
View Answer
The description says it will not work with '49-'53 heads because it hits the thermostat housing, but the picture shown appears to be of a '49-'53 head. Will it work?
by Mike
• 8 years ago
1 answer
View Answer
2 of 2 questions shown
1939-1940 Ford 1 Ton Pickup
239 Ford Flathead V8
1941-1947 Ford 1 Ton Pickup
221 Ford Flathead V8
239 Ford Flathead V8
1938 Ford 1/2 Ton Pickup
221 Ford Flathead V8
1939-1947 Ford 1/2 Ton Pickup
221 Ford Flathead V8
239 Ford Flathead V8
1938 Ford 3/4 Ton Pickup
221 Ford Flathead V8
1939-1947 Ford 3/4 Ton Pickup
221 Ford Flathead V8
239 Ford Flathead V8
1952 Ford Country Sedan
239 Ford Flathead V8
1952 Ford Country Squire
239 Ford Flathead V8
1939-1940 Ford Deluxe
221 Ford Flathead V8
239 Ford Flathead V8
1946-1948 Ford Deluxe
221 Ford Flathead V8
239 Ford Flathead V8
1948 Ford F1
221 Ford Flathead V8
239 Ford Flathead V8
1948 Ford F2
221 Ford Flathead V8
239 Ford Flathead V8
1948 Ford F3
221 Ford Flathead V8
239 Ford Flathead V8
1942 Ford Model 21 A Deluxe
221 Ford Flathead V8
239 Ford Flathead V8
1938 Ford Model 81 A
221 Ford Flathead V8
1938 Ford Model 82 A
221 Ford Flathead V8
1938 Ford Model 85
221 Ford Flathead V8
1938 Ford Sedan Delivery
221 Ford Flathead V8
1939-1940 Ford Sedan Delivery
221 Ford Flathead V8
239 Ford Flathead V8
1941 Ford Sedan Delivery
239 Ford Flathead V8
1942 Ford Sedan Delivery
221 Ford Flathead V8
239 Ford Flathead V8
1946-1947 Ford Sedan Delivery
221 Ford Flathead V8
239 Ford Flathead V8
1942 Ford Super Deluxe
221 Ford Flathead V8
239 Ford Flathead V8
1946-1948 Ford Super Deluxe
221 Ford Flathead V8
239 Ford Flathead V8
1946-1948 Mercury Mercury
221 Ford Flathead V8
239 Ford Flathead V8
1941 Mercury Series 19A
239 Ford Flathead V8
1942 Mercury Series 29A
221 Ford Flathead V8
239 Ford Flathead V8
1939 Mercury Series 99A
239 Ford Flathead V8
1940 Mercury Series O9A
239 Ford Flathead V8
