|
#91139535
$145.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
33-34 Ford, Aluminum, Polished, 5 Gauge Quantity
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with AutoMeter gauges.
This panel features three drilled and recessed holes that can be used for mini LED indicator lights such as # 911-31050-color. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.
Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash.
Specs
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91139535 |
| Brand | Speedway Motors |
| Material Type | Aluminum |
| Finish | Polished |
| GENERAL | |
| Speedometer Hole Diameter | 3.17" |
| Auxiliary Gauge Hole Diameter | 2.07" |
| Gauge Quantity | 5 |
| Overall Width | 11.75" |
| Overall Height | 5.75" |
| Overall Thickness | .38" |
| Sold in Quantity | Each |
5
2 Reviews
Customers appreciate the product's quality, noting the construction as "well made" and "very nice". It stands out for its high-grade material quality. However, some customers found it incompatible with pre-existing dash holes. Overall, the product is practical and sturdy, if not universally fitting.
5
2 reviews
5
2
4
0
3
0
2
0
1
0
Filter by Ratings
If would have worked out with holes already in dash I would
5.0
9 years ago
Sheldon
UT, Midway
Verified
Did not match up with holes already in dash, but quality was very nice, wish it would have worked
Would Recommend
Nice piece
5.0
9 years ago
Fastdad
Ballwin, mo.
Verified
Looks like a well made piece
Would Recommend
Showing 2 of 2 reviews
5 Questions • 6 Answers
will this fit in the stock location of 33 ford sedan original Dash i dont mean that the gauges line up or anything like that just does it fit in the area and do you cut the dash and put this on top of cut out
by clyde
• 7 years ago
1 answer
View Answer
Is this piece polished?
by Paul
• 9 years ago
2 answers
View Answers
Does this have a template for cutting the hole in my dash? I am going to use this on a '62 Willys pickup and am wondering if in fact it has a lip so that I would need to cut my hole a bit smaller than the overall size of the gauge panel? A template would make this procedure easier. Thanks for always answering all my questions so clearly and in a timely manner. Rich
by DocChicago
• 9 years ago
1 answer
View Answer
I plan to use this on a '62 Willys pickup dash to replace the 5" speedometer with a 3 1/8" Autometer speedometer and 2 1/16" gauges. The dash is simply flat steel so I need to know if this part is flat or curved? Thanks, Rich Howe
by DocChicago
• 9 years ago
1 answer
View Answer
speedometer hole dimentions please.
by Phil
• 15 years ago
1 answer
View Answer
5 of 5 questions shown
1933-1934 Ford Model 40
1934 Ford Model 40 A
1933 Ford Model 46
1933-1934 Ford Model BB
1933-1934 Ford Sedan Delivery
