|
#91134001
$48.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
32.50" Overall Length, .31" Outside Diameter, Polished
| MFG. Part # | 91134001 |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Finish | Polished |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyBeautifully polished, 1932-1936 solid stainless steel support rods for radiators. Thread covers sold separately. Rods are approx. 32" long.
Anti-sieze MUST be used on the threads to prevent the nuts from galling.
Charts
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91134001 |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Finish | Polished |
| GENERAL | |
| Overall Length | 32.50" |
| Outside Diameter | .31" |
| Thread Length | 3.88" |
| Thread Pitch | 5/16"-24 |
| Sold in Quantity | Pair |
4.9
82 Reviews
Customers highly recommend our product, frequently praising its high quality, practicality and good fit for their needs. Mentioned as being easy to install by most users, the product is greatly appreciated for its sturdy and durable design. The finish is consistently hailed for being excellent, complementing overall aesthetics. Users have emphasized its perfect fit and adjustability across several applications. Concerning safety, users stated that the product effectively stabilized their radiator, contributing to safer operation. Notably, some users have been repeat customers, reflecting the trusted quality and performance of our product. Overall, customer sentiment points to the product standing out for its superior qualities compared to similar offerings from competitors.
4.9
82 reviews
5
76
4
5
3
1
2
0
1
0
Most Liked Positive Review
5.0
More Bling
On time packed well easy install in about 2 hour's. They look great and support like they should.
Most Liked Negative Review
3.0
Radiator Support Rods
these run from the firewall to the top of the radiator for support .
Filter by Ratings
yes I would buy it again
5.0
6 months ago
Ralph
MN
Verified
Ford Model T hotrod
Would Recommend
Worked great, looks great.
5.0
11 months ago
Rabbit
South, US
Verified
I used these on a Model A Hot Rod. They were about an inch too long so I trimmed to fit. I had no problem with the threads.
Would Recommend
Good quality
5.0
a year ago
Speed
Miami Az
Verified
The extra threads on the radiator end allowed me to fine tune the rods for a perfect fit.
Would Recommend
i would buy again
5.0
a year ago
bruce
medford or
Verified
great part.
Would Recommend
Yes
5.0
a year ago
Dick
Mi
Verified
Great
Would Recommend
Radiator Support
5.0
2 years ago
Gii
Ozark Missouri
Verified
Excellent
Would Recommend
Yes I would buy again
5.0
2 years ago
Jake
Rock Hall Md
Verified
Needed longer than stock 32 support rods
Would Recommend
Quality product
5.0
2 years ago
Jack
Palatka Fl
Verified
Worked great
Would Recommend
I have been thinking about this product for awhile
5.0
2 years ago
Hemi
Prescott Az
Verified
Haven't mounted them yet probably before the weekend though
Would Recommend
I will buy again
5.0
3 years ago
hotrod
Ohio
Verified
32 ford
Would Recommend
Showing 10 of 82 reviews
7 Questions • 11 Answers
i have a 1930 ford roadster with a 32 grill. i would like to replace the radiator brackets. the length i need is 28.75 inches. is there enough thread to cut the 32 inch brackets down to fit?
by dave
• 4 years ago
1 answer
View Answer
How are the radiator support rods mounted at the radiator on a 32 ford 3 window coupe?
by 32 Coupe Guy
• 8 years ago
4 answers
View Answers
How do I mount the 32 to 36 Speedway radiator support rods to the radiator or radiator housing? I see the firewall mounts, but what do I use at the radiator>
by 32 Coupe Guy
• 8 years ago
2 answers
View Answers
I NEED 36" FOR MY T-BUCKET. DO YOU HAVE LONGER RODS?
by capnz
• 10 years ago
1 answer
View Answer
Do you have any that are shorter, I need something about 27 inches long
by FAF
• 10 years ago
1 answer
View Answer
is the price for 1 rod or are they sold as a pair.
by edwardo
• 15 years ago
1 answer
View Answer
How long are the threads on the end of the rods?
by Dave
• 15 years ago
1 answer
View Answer
7 of 7 questions shown
