1928-48 Ford Rear Axle Hub Key
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
On early Ford's, the rear axles have a key way cut into the tapered end of the axle where a steel key is fitted, the wheels lock onto this key, and are then held onto the axle with a nut. Be sure to check your old keys, worn keys can damage the keyway and therefore the axle.
This is a 1928-48 Ford tight fitting rear axle hub key that will prevent damage to the axle key way. This key is tapered 1/4" on one side and 1/2" on the other side. The 1/2" tapered end goes towards the differential.
- 2-3/4" Long
- 1/4" wide/thick
- 2 required per car
More Like This
Wheel Center for Stock Car 15 Inch Steel Wheel, 5 on 4-1/2
Lightweight Steel GN Rear Hub
Speedway 1940-Design Early Ford Front Wheel Hub, 5 on 5.5 BP
Speedway Grand National Rear Hub, 5 on 4-3/4 Inch
Winters Performance 2255C-9120 Grand National Hub Kit, 5 on 5 Inch
Speedway Axle Bearing Retainer, Small Ford Housing
Winters Performance 1750 Grand National Hub Assembly, 5 on 5 Inch
Wide 5 Wheel Center for 15 Inch Steel Wheels
Speedway Grand National Rear Hub, 5 on 5 Inch
Speedway 1940-Design Early Ford Banjo Rear Axle Wheel Hub, 5 on 5.5 BP