|
#91129001
$28.99
/each
On Backorder
This part is Backordered. We currently do not have an estimate when this item will ship.
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
| MFG. Part # | 91129001 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Chrome |
| Gasket(s) Included | Yes |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyWARNING:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91129001 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Chrome |
| Gasket(s) Included | Yes |
| GENERAL | |
| Outside Diameter | 2.67" |
| Gasket Outside Diameter | 2.15" |
| Sold in Quantity | Each |
4.7
10 Reviews
Customers appreciate our product for its practicality, as a vented gas cap fitting their needs. The quality of the product was recognized with it fitting perfectly and being beautifully chromed. It worked seamlessly for a 1928 Ford model, contrasting positively with competitors. Despite a mentioned issue with the gasket material, overall, users found the gas cap to have high usability and quality. They value it as an excellent choice for Hot Rod parts, adding to its strong reputation. There is a high level of customer satisfaction and recommendations to repurchase this product.
4.7
10 reviews
5
9
4
0
3
0
2
1
1
0
Most Liked Positive Review
5.0
Purchased gas cap
Have had no difficulty in dealing with this outstanding company. Great merchandise in your catalog.
Most Liked Negative Review
2.0
Gasket material unsuitable for use in a gas cap
The rubber used as the gasket is not compatible with gas! This is a problem as this is a GAS CAP! The rubber swells and will not seal. Gas then leaks past onto the paint and since this is a Model A, the smell of gas come in the car.
Filter by Ratings
Great product. I would definitely buy again if I needed to
5.0
a year ago
Pete
Lavallette, NJ
Verified
Changed out the gas cap for one that is new & shiny!
Would Recommend
Vented fuel cap
5.0
3 years ago
Bob
Ohio
Verified
Vented cap was what I needed
Would Recommend
Yes
5.0
3 years ago
Spaz
Keokuk iowa
Verified
Worked great. Thanks
Gasket material unsuitable for use in a gas cap
2.0
5 years ago
Hotrodbob
Port Hueneme, CA
Verified
The rubber used as the gasket is not compatible with gas! This is a problem as this is a GAS CAP! The rubber swells and will not seal. Gas then leaks past onto the paint and since this is a Model A, the smell of gas come in the car.
Would Not Recommend
Ye I would buy again
5.0
5 years ago
Glenn
Toronto
Verified
Looks good
Speedway is the best all around source for Hot Rod parts.
5.0
6 years ago
David
Stuart Fl
Verified
Nice quality
Would Recommend
i would buy this product again
5.0
7 years ago
Geno
Pennsylvania
Verified
perfect
Would Recommend
Perfect fit and looks great
5.0
8 years ago
Mightymouse
Marshall Michigan
Verified
Beautifully chromed
Would Recommend
Purchased gas cap
5.0
8 years ago
Jerry
Chattanooga, Tn. 37363
Verified
Have had no difficulty in dealing with this outstanding company. Great merchandise in your catalog.
Would Recommend
Looks good.
5.0
11 years ago
Matt
visalia, ca
worked perfect for a 1928 ford
Would Recommend
Showing 10 of 10 reviews
2 Questions • 2 Answers
Is it possible to post a picture of the inside of the cap? How is the inside threaded portion held to the outside? Is there one or 2 rivets?
by Jeremy
• 9 years ago
1 answer
View Answer
You state the inside diameter is 2-3/16" or (2.187") which is correct for the tank- I hope that means the inside diameter of the threads. I have purchased two from different vendors and they are too large (inside threads) for my '29 as well as three other 29 tanks I tried them on. If you guys can verify the inside diameter - I will purchase some.
by Poppa Sid
• 11 years ago
1 answer
View Answer
2 of 2 questions shown
1928-1929 Ford Model A
