McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5

SAME DAY SHIPPING! Order within the next 6 minutes and receive same day shipping

Specs
Material Type:
Teflon
Overall Length:
16.00
Sold in Quantity:
Kit
Outer Braid:
Stainless
Outlet Fitting:
10mm-1.5
Hose OD:
.25
Garage Sale:
No
Notes
DOT approved. Includes 10mm-1.5 banjo bolts/washers, 3/8"-24 IFF frame adapter fittings, and frame tabs with clips.
DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
Product Video
DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5

Click image to enlarge

Watch the video below to learn more about the differences in brake lines, flare types and fittings you may want to consider before plumbing away on your current chassis project.

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

  • Stainless steel braid over Teflon® hose
  • Reduces volumetric expansion of brake lines
  • Reduces brake fade
  • Less susceptible to debris than rubber line

Notes

  1. If using 1/4" brake line with a 7/16"-24 flare nut on your chassis, use adapter fitting # 9103183-3/8 which has a 3/8"-24 IF male and a 7/16"-24 IF female configuration.
  2. Brake System Builder Tip (GIF)

Item Details

1978-Up GM with 10mm-1.5 caliper threads

Customer Reviews

Rated 4.8 out of 5 by 12 reviewers.
RATING BREAKDOWN
12 reviews
5 Stars
10
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Leerab
Verified Purchaser
Santa Fe, NM, USA
Product Rating

perfect fit

September 22, 2014
these lines worked out perfect,I used them on my 1929 Ford hot Rod.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

coolrodgarage
Verified Purchaser
Sevierville, TN, USA
Product Rating

great kit

April 23, 2014
This is a great kit. All parts needed to install. Speedway is good to deal with . Great communication and very helpful.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Dyno1
Verified Purchaser
Rochester, MI, USA
Product Rating

Excellent product

December 29, 2012
This product came as ordered, worked perfectly with no issues.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

carlos 56 ford
hollywood florida
Product Rating

makes a big difference

January 24, 2010
great quality great product just great
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Pulse
Hometown USA
Product Rating

Very, very clean looking..

August 27, 2010
This is a great looking kit and comes with everything I needed. Another great product from Speedway!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

mobydidit
Willow Street, PA
Product Rating

Great Quality

April 30, 2010
This kit made life easier putting late model disc brakes in a mid 60's car
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Art from FL
Verified Purchaser
Gulfport, FL
Product Rating

OEM may be better

August 28, 2011
These went on a Mustang II subframe conversion for a Studebaker Lark. The lenght was perfect, all small parts were included. The banjo ends seemed rather small, OEM are about twice the size with grooves cut around the bolt hole for sealing at the copper washers. This may or may not be a factor. If they leak, I'll let you know!
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Al
Verified Purchaser
Lake Havasu City Az
Product Rating

Nice product

May 15, 2011
I ordered the wrong one (my bad) but by the time I went to use it I had opened the package and thown the box and other paperwork away. [...]End result order another one.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Phastlane Garage
Verified Purchaser
West Haven, UT
Product Rating

Well made products

December 16, 2011
Set up on a gasser car and close to not fitting the distance. Could offer a longer version in this package that would be ideal.
Pros:
  • Lightweight
  • Easy To Install
  • Decreased Stopping Distance
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

65stang03
Pottstown Pa
Product Rating

Excellent product

June 06, 2010
Bought numerous parts of [...], non that would work. Got it all right here and it was right the first time around. [...]
Pros:
  • Excactly what I needed
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

3 questions : 3 answers

How long are these hoses? From center of banjo to the IF end. Thank you JimJ Putting Metric GM calipers on the rear of my 23 T Bucket, Ford 9 inch axle using weld on brackets, welding small tabs on the axle to mount/hold the IF ends with 3/16 tubing. Need to know the length

1 answers
JimJ360
Northern Illinois
April 21, 2014

How long are these hoses? From center of banjo to the IF end. Thank you JimJ Putting Metric GM calipers on the rear of my 23 T Bucket, Ford 9 inch axle using weld on brackets, welding small tabs on the axle to mount/hold the IF ends with 3/16 tubing. Need to know the length

Answers

April 21, 2014
EricM
The 16" overall length is actually measured from center of the banjo to the end of the IFF fitting.

I am putting 73-79 ford truck calipers on my 66 ford f100 2wd.Will this set up work for this application?

1 answers
February 02, 2011

I am putting 73-79 ford truck calipers on my 66 ford f100 2wd.Will this set up work for this application?

Answers

February 08, 2011
Zach
Our Stainless brake hose kits come in several different lengths from 8" up to 19" and have different banjo bolts for different size caliper threads. I am unsure what caliper threads your ford truck calipers are. The best advice I can give is to check what thread you calipers have and we should have a banjo bolt to make this work for you.

Will this setup bolt right up to the thru frame fitting?

1 answers
Buster
Lancaster,Ky
April 28, 2011

Will this setup bolt right up to the thru frame fitting?

Answers

May 02, 2011
John H.
The thru frame fittings have 1/8NPT threads & -3AN fittings. The brake hoses you mentioned have 3/8x24 fittings on the frame end. They will not work with the thru frame fittings.
Page 1 of 1

You may also be interested in:

Rubber Brake Line Hose Set for 10mm-1.5 Calipers
(Part #6178569)
                        

These 15" front brake hoses are designed for 1955-1974 GM front disc brake conversions using stock-style 1969-1988 GM single-piston calipers.

Note: Hose banjo bolts sold separately.

Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
(Part #6178566)
                        

Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy to install brake line tabs and clips.

  • 15" length including fittings
  • 3/8"-24 IFF and 10mm-1.5
  • For 1978-1988 GM Calipers

Lines are 15" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
(Part #6178559)
                        These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
                    
Wilwood 220-12104 14 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012104)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Wilwood 220-12105 18 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012105)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Wilwood 220-12106 22 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012106)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Wilwood 220-12107 Flexline Kit, 18 Inch D154 M10BF to 10mm Banjo
(Part #83522012107)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
3/8-24 IFM to 7/16-24 IFF Adapter
(Part #9103183-3/8)
                        

Brass adapters. Select from:

  • 3/8"-24 IFM to 7/16" - 24 IFF
  • 7/16"-24 IFM to 3/8" - 24 IFF
  • 1/2"-20 IFM to 3/8" - 24 IFF
  • 9/16"-18 IFM to 3/8" - 24 IFF