These turnbuckles from Stallard® are designed for use on Micro Sprint racing applications. They come in a natural aluminum finish and feature 7/16" rod end heims for easy adjustment. Choose your desired length. Please note these are listed by the tube lengths provided. Each heim has approximately 1.5" of length added to each end therefore the working eye to eye length will be approximately 3" longer than the listed tube length. For example, the working eye to eye length of the 5.25" unit will be approximately 8.25" with slight length adjustment on either side of this working length.

Available in 3.25", 3.75", 4.24", 4.75", 5.25" and 6" tube lengths
7/16" rod end heims

Specifications

KEY SPECS
MFG. Part #	Select Size to see
Brand	Speedway Motors

GENERAL
Material Type	Aluminum
Finish	Natural
Sold in Quantity	Each
Notes	7/16" Heim

Ratings & Reviews

4.4

10 Reviews

Overall Assessment

Customers found the product to be as shown, working perfectly for its intended applications such as engine torque bracing and alternator adjustment. It's valued for its practicality and correct pricing. Some customers recommended it for its usability, like creating custom alternator brackets. Despite poor machining on one side as noted by one customer, the majority considered it to be a good quality, sturdy piece and would buy it again. Some modification might be needed for fitment in specific applications. A missing part issue was addressed by the customer themselves.

Write A Review

4.4

10 reviews

Most Liked Positive Review

4.0

sturdy , finish OK ,

The heims were made well but a little to big diameter for my application and needed modification to fit where I needed them. 7/16" mounting hole was also a bit large and had to make 7/16" to 3/8" sleeves. I would have liked a lighter version of this part made the same way but , didn't see one offered.

Most Liked Negative Review

2.0

Functions but not as pictured

Only one side of the turn buckle was machined unlike what is pictured here. It looks like it was clamped poorly and deformed the corners of the hex which are raw extrusion. The holes are not concentric to the outer hex, so if your application is a close clearance it will rub every revolution. I will buy a left handed tap and machine my own next time. Overall quality is poor.

Filter by Ratings

Sort Reviews

Perfect motor adjuster.

5.0

2 years ago

19c

Verified

Worked great in my Triple X micro as a motor slider.

Fit perfectly

5.0

2 years ago

Bill

Colorado

Verified

Moved my ford alternator from the bottom of the engine to the top and needed this. It fit and works great!

Would Recommend

Quality made piece

5.0

3 years ago

Rusty67

Southern Indiana

Verified

Using two of them for an engine torque brace.

Would Recommend

Exactly as shown

5.0

4 years ago

Naples,FL

Verified

Worked perfectly and priced right

Would Recommend

I would recommend this product for alternative adjustment

5.0

4 years ago

Ava Ill

Verified

Worked as I intended for the application used for alternator adjustment

Would Recommend

Timely shipping and worked as needed.

5.0

6 years ago

Jordan

St. Louis

Verified

Used turnbuckle to make a custom alternator bracket for my 72 Dart, worked exactly like i needed it to.

Would Recommend

Would buy this product again

5.0

6 years ago

Mundy

Dallas,ga

Verified

Exactly what I needed, used 7/16" bolts.

Would Recommend

Functions but not as pictured

2.0

8 years ago

Alex

Flagstaff

Verified

Would Not Recommend

sturdy , finish OK ,

4.0

10 years ago

Coastalman

Tillamook , Oregon

Verified

Would Recommend

Quick delivery, missing parts

3.0

11 years ago

court318

Louisiana, USA

Verified

Items where exactly what I wanted, work well. Only complaint I have is one turnbuckle was missing the reverse thread jam nut, had to go buy a new set of jam nuts to have a matching set.

Showing 10 of 10 reviews

Questions & Answers

7 Questions • 7 Answers

Sort Questions

How Thick are the heim joints included?

by Mikey

• 9 years ago

1 answer

View Answer

What are the hole diameters?

by Michael

• 9 years ago

1 answer

View Answer

can these be used in between the front axel and friction shock ?? on like a t bucket ??

by jim

• 10 years ago

1 answer

View Answer

So is the measurement in the description that says it adds 3" with the rose joints from the center of the eyes or total length?

by ohse

• 10 years ago

1 answer

View Answer

How strong are these I would like to use something like this in a full load application that will probably pull on the ends with up to 100#. Is this strong enough or will it break.

by VRC1

• 11 years ago

1 answer

View Answer

Are the ends adjustable?

by Robert333

• 12 years ago

1 answer

View Answer

Length question I see where it has multiple lengths. Is the measurements including the heims or just the shaft?

by TJs49F1

• 12 years ago

1 answer

View Answer

7 of 7 questions shown