Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Speedway 7 Inch Tri-Bar Headlights

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Sold in Quantity:
Pair
Finish:
Chrome
Material Type:
Plastic
Lens Color:
Blue Dot
Bezel Finish:
Chrome
Bulb Type:
H-4
Lens Material:
Glass
Garage Sale:
No
Outside Diameter:
6.63
Depth:
4.50
Notes
Wiring big tail is (NOT) included, uses 3 prong.
Speedway 7 Inch Tri-Bar Headlights

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Speedway's traditional Tri-Bar H4 Halogen headlights allow you to have "the look" with out breaking the bank. Features a chrome plated, high impact plastic housing with a thick glass lens. These headlights do have high and low beams, but they DO NOT have turn signals.

  • 6-5/8" Headlight O.D.
  • High and Low beams
  • 12 volt H4 bulb included
  • Headlight pigtail NOT included
  • Uses common 3-prong connector

Headlight Wiring Chart (GIF)

Installation Instructions (PDF)  

NOTE: These headlights cannot make use of our L.E.D. Turn Signal Indicator for H-4 Bulbs, item # 910-64150.

Customer Reviews

Rated 4.6 out of 5 by 5 reviewers.
RATING BREAKDOWN
5 reviews
5 Stars
3
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

josh1966
Verified Purchaser
Tyler, TX, USA

overall very easy installation

August 24, 2014
Besides one lite showing up witha small hairline fracture install and operation is very good
Pros:
  • derect replacement
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

dcartier
Medina, OH 44256, USA

This product accents the brass headlamps

April 05, 2013
I purchased a pair of these lamps to retro fit the brass headlamps from Brassworks that come with Wagner lights already. The alignment tabs in the the new lenses took slight dremeling to make the light sit deeper into the brass housing. This allows a not forced closer of the front cover of the brass lamp. The tabs to Dremel are the out side tabs (each side) of the Main tab (3 of them) that fits into the alignment hole in the brass lamp. Not a big DEAL !!! Once ground flush on either side of the main tab , the lense fit like a glove. I would recommend these lamps for anyone buying the BRASSWORKS lamps as a retro fit.
Pros:
  • excellent additional stying to the brass headlamps
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Kobura
Saratoga, CA, USA

Nice Headlamps

October 23, 2012
Just installed them on my Backdraft RT3 Cobra. No problems with installation. They look and work great. The tri-bars are not polished chrome which was a little disappointing, but the price was right. Pretty much what I wanted.
Pros:
  • Good Value
Cons:
  • quality could be better
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

DannyBoy
Verified Purchaser
Columbia, MD

Tri Bar HL's

June 10, 2011
No problems
Pros:
  • Easy To Use
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

dbomb53
phx, az

Great quality, ready for order #2

January 23, 2010
great addition to my truck, bright and clear.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

4 questions : 6 answers

2 answers

Are the glass lenses flat? Looking for a flat 7" headlight to modify for my original 23 9" headlights.

rtlandon
US
June 09, 2013

Are the glass lenses flat? Looking for a flat 7" headlight to modify for my original 23 9" headlights.

Answers

October 01, 2013
BOOMBOOM1
THAT DEPENDS ON THE LENS ASSEMBLY YOU BUY!
June 10, 2013
Jason
The speedway 7" tri-bar headlight have a bevel to the lens
2 answers

I have a '23 T Tudor and want to use the original headlight "buckets". This is a sedan not a roadster. Will these 7" Tri-bar headlamps 91061011 fit into my stock headlight buckets? roger

Seguin, Texas 78155
August 27, 2011

I have a '23 T Tudor and want to use the original headlight "buckets". This is a sedan not a roadster. Will these 7" Tri-bar headlamps 91061011 fit into my stock headlight buckets? roger

Answers

April 06, 2013
dcartier
Roger, I just posted a review on the tribar with the turn signal, They DO FIT but, there are 3 tabs the allow alignment of the lense into the brass housing. For each tab there is one main one that slides into its corresponding slot and on either side OF that tab, there is a shorter tab . I Dremeled the SHORTER tabs flush leaving the taller tabs alone and they fit like a glove. This allows that main hinged cover of the brass lamp to close and allows the threaded nut to screw into the main housing side without any force and the lamp sits firmly once the outer door is secure. I hope this helps, I just did this today Sat april 6. The tabs are plastic to no big deal.
August 29, 2011
John
These 7” Tri Bar headlights carry the same dimensions as the single headlight cars using the 6014 style headlight. To fit in a ’23 T original headlight housing would require an adapter of sort to fill up the void in the housing to this light. For comparison simply visit a local parts store and request a 6014 seal beam for trial fit into your housing.
1 answers

WHEN INSTALLING THESE DO YOU STILL USE THE MOUNTING RING THAT HOLDS THE OE SEALED BEAM TO YHE MOUNT BUCKET IN MY 73 CAMARO... THANKS TONY

May 29, 2011

WHEN INSTALLING THESE DO YOU STILL USE THE MOUNTING RING THAT HOLDS THE OE SEALED BEAM TO YHE MOUNT BUCKET IN MY 73 CAMARO... THANKS TONY

Answers

June 02, 2011
John
These 7” Tri-bar headlights are replacement for the majority of the headlights and mounting hardware that would receive the normal 6014 style single headlight common to many years, makes, and models of vehicles. These are vehicles that had one headlight per side and not to be confused to the later years that had two headlights per side with one serving as low beam and the other high beam. Also used in aftermarket headlight assemblies utilizing the 7” lights. When installing in the early vehicles and other applications where the seal beam is retained by a trim ring or chrome bezel you will still use this part to hold the headlight in the “bucket”. There may be some alteration to the light or the retaining ring to assure proper or satisfactory fit.
1 answers

would these lights bolt right into a 65 ford econoline pickup truck, with no extra wiring, and do the bolt in the same way?

rob
tehachapi ca
January 17, 2011

would these lights bolt right into a 65 ford econoline pickup truck, with no extra wiring, and do the bolt in the same way?

Answers

January 20, 2011
Craig
These tri-bar headlight inserts part number: 91061011 have a 7" housing and can be used to replace a 7" sealed beam light. They will mount in the stock location and take the common 3 prong plug on the back. These lights do protrude out the back more than a sealed beam bulb would and may require some modification to the "bucket" to get them to fit right.
Page 1 of 1

You may also be interested in:

Replacement 7 Inch Fluted Headlights
(Part #91061018)
                        

Here's a slick 7" replacement tri-bar style headlight bulb that will outperform your old sealed beam headlights. In the past, tri-bar headlights looked good but performed terribly. These upgraded headlights feature high powered quartz halogen H4 bulbs and a newly designed curved lens and fluted reflector for improved lighting and better visibility. Chrome plated, molded plastic housing with a glass lens.

The perfect addition to a retro-rod or a sleek new street machine. Will directly replace 6014 sealed beam headlamps.

Wiring Chart (GIF)

Replacement Quartz H-4 Bulb - 6 Volt
(Part #91064196)
                        Replacement quartz H-4 6 volt bulb.  55 watts for low beam and 60 for high beam.
                    
Delta 03-1304-LED2 LED H4 Headlight Bulb Conversion Kit, 25 Watt
(Part #910031304)
                        

These headlight bulb LED H4 Systems from Delta are Hi/Lo 25 Watt, produce 3,000 LM and 6,000k of pure white light all while only drawing 2 Amps. These systems are cooled by aluminum heat sink and 12,000 RPM electric fan. These kits deliver near daylight luminosity and clarity provided by the world’s most efficient light source. These kits are rated for 25,000 hours or 22 years of use. These LED H4 conversion kits are not DOT Compliant.

  • 6000k 
  • 3000 lumen 
  • 22 year operation lifetime 
  • Plug and play instillation 
  • Sold in pairs
Headlight Socket/Plug, Bulb Pigtail Wire Connector
(Part #91064601)
                        

Three prong terminal with wire socket plug leads for 2 or 3 prong headlights. This headlight plug  works for turn signal flasher. Wire size is 18 gauge.

 

Wiring Chart (GIF)

Replacement Quartz Halogen H-4 Headlight Bulb, 12 Volt
(Part #91064193)
                        

Quartz halogen H-4 bulb directly replaces standard-type 12 volt bulbs for improved night time visibility. Has a 60 watt high beam, 55 watt low beam.

Wiring Chart (GIF)