(0)
Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Speedway 4-Bar Rod Ends

Price: $12.99 - $17.99
Click image to enlarge Click image to enlarge
  • Speedway 4-Bar Rod Ends
  • Speedway 4-Bar Rod Ends
  • Speedway 4-Bar Rod Ends
  • Speedway 4-Bar Rod Ends
No video at this time.
 

Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends come in either forged steel or fully polished investment cast stainless steel for superior strength and durability.

All rod ends feature a 5/8"-18 threaded shank and the nylon bushing has a steel sleeve that accepts a 1/2" bolt. Choose from straight, 7° or 11° angled shanks with right hand threads.
 

4-Bar Rod Ends come in four different configurations:
  • Straight Shank - Mounting eye is perpendicular to threaded shank
    • RH threads 
    • Center of mounting eye to end of threads is 2-7/8"
  • 7° Shank - Mounting eye is offset 7° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 7° angle)
    • RH threads 
    • Center of mounting eye to end of threads on short side is 2-13/16"
    • Center of mounting eye to end of threads on long side is 2-15/16"
  • 11° Shank - Mounting eye is offset 11° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 11° angle)
    • RH threads
  • LH Shank - Reverse, left hand threads. Mounting eye is perpendicular to threaded shank
    • Center of mounting eye to end of threads is 2-7/8"
  • Overall width: 1.370"
  • Rod end width: 1.050"
  • Rod end I.D.: 1.125"
  • Steel sleeve O.D.: 0.750"
  • Steel sleeve I.D.: 0.500"
  • Threaded shaft length: 1-7/8"
  • Tip of threads to edge of bushing (edge of hole): 2.25"
  • Tip of threads to center eye of rod end: 2.75"
Reviews for Item #: 91008001
REVIEWED BY 2 CUSTOMERS
Sort by:
Displaying Reviews 1-2 of 2
Processing
 

Nice Piece

By hurstbros0 from Salem In. on 1/24/2010
Bottom Line: Yes, I would recommend this to a friend

I used mine for a panhard bar. They give unlike heim ends.

Was this review helpful to you? Yes / No - You may also flag this review.
Please let us know what kind of issue this is:









Email Address:

Comments:

[ 1 of 1 customers found this review helpful ]
 

Excellent product

By Steve from New Zealand on 1/31/2010
Pros:
Great looks, Well Made
Best Uses:
Radius arm mounting
Bottom Line: Yes, I would recommend this to a friend

Easy to fit and lokks to be very durable

Was this review helpful to you? Yes / No - You may also flag this review.
Please let us know what kind of issue this is:









Email Address:

Comments:

Displaying Reviews 1-2 of 2
 

Questions and Answers for Item #: 91008001

Get your questions answered by the community. Ask or answer questions below.

4 Questions | 4 Answers
Displaying Questions 1-4 of 4
Processing

Q:

Can i get these in LH thread and RH thread?

Asked on 3/8/2011 5:38:17 AM by from noble il

Answers (1) Know the answer? Answer this question

Q:

What is the width of this product?

Asked on 4/1/2011 6:43:53 AM by from

Answers (1) Know the answer? Answer this question

Q:

Is lubrication between the nylon bushing ID and steel sleeve necessary? If so, what type of lube is recommended?

Asked on 4/15/2011 2:29:48 AM by from noble il

Answers (1) Know the answer? Answer this question

Q:

How long do the bushing last .... I have some new bushing that are 12 years old . ????

Asked on 8/5/2011 6:24:18 AM by tom from michigan

Answers (1) Know the answer? Answer this question
Displaying Questions 1-4 of 4

Do you have a question about this product?

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
4 Bar Ends - 11 Degree Shank
Item #:
91008001
 
(2 Ratings)
Forged Steel 4-Bar End - Straight Shank/LH Thread
Price:
$14.99
EA
In Stock
Item #:
91008002
 
(0 Rating)
STAINLESS STEEL RH ROD END
Item #:
91008051
 
(2 Ratings)
Stainless Steel 4-Bar Rod End - Straight Shank/LH Thread
Price:
$17.99
EA
In Stock
Item #:
91008052
 
(0 Rating)
Our Techs also Suggest the Following:
Rod End Bushing Kit, 1/2" Bolt
Price:
$24.99
ST
In Stock
Item #:
91008015
Item Details:
Used with Speedway 4-bar kits & 4-bar rod ends
 
(7 Ratings)
Pro-Blend Anti-Seize
Price:
$6.99
EA
In Stock
Item #:
91016009
 
(2 Ratings)
Jam Nut, 5/8" RH - Stainless Steel
Price:
$2.99
EA
In Stock
Item #:
91001156
 
(2 Ratings)
You May Also Be Interested In...