Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

"US Brake" Page 1 of 1

  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    (Part #91029984)
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 6.2:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • AFCO 7241-1206 F33i Series Aluminum Caliper, 1.75 In Bore/.810 Rotor
    AFCO 7241-1206 F33i Series Aluminum Caliper, 1.75 In Bore/.810 Rotor
    (Part #10672411206)
    x
                

    Advanced technology allows the F33i caliper to outperform the competition. Four unique, locking sleeves increase the caliper's structural integrity and resistance to distortion. Lower pedal effort, less brake pad taper, and more consistent lap times make this caliper the winner's choice. Machined from billet 6061-T6 aluminum, these calipers are the hot set-up for todays serious racer.

    • Innovative internal construction locks together the caliper halves for increased rigidity; extra rigidity provides more consistent stopping performance and less brake pad taper
    • Ultra-high temperature resistant square-cut seals resist damage caused from heat and wear
    • Billet-machined 6061-T6 aluminum construction provides maximum strength
    • Bore Diameter: 1.75"
    • Disc Width: 0.81"

    Note: Replaces DL type calipers, 5.25" mounting centers.  Commonly used on late models or sprint cars.

  • AFCO 7241-1204 F33i Series Caliper, 1.38 Inch Bore, .810 Inch Rotor
    AFCO 7241-1204 F33i Series Caliper, 1.38 Inch Bore, .810 Inch Rotor
    (Part #10672411204)
    x
                

    Advanced technology allows the F33i caliper to outperform the competition. Four unique, locking sleeves increase the caliper's structural integrity and resistance to distortion. Lower pedal effort, less brake pad taper, and more consistent lap times make this caliper the winner's choice. Machined from billet 6061-T6 aluminum, these calipers are the hot set-up for todays serious racer.

    • Innovative internal construction locks together the caliper halves for increased rigidity; extra rigidity provides more consistent stopping performance and less brake pad taper
    • Ultra-high temperature resistant square-cut seals resist damage caused from heat and wear
    • Billet-machined 6061-T6 aluminum construction provides maximum strength
    • Bore Diameter: 1.38"
    • Disc Width: 0.81"

    Note: Replaces DL type calipers, 5.25" mounting centers.  Commonly used on late models or sprint cars.

  • AFCO 7241-1002 F88i LH Rear Aluminum Caliper-1.88 Bore/1.25 Inch Rotor
    AFCO 7241-1002 F88i LH Rear Aluminum Caliper-1.88 Bore/1.25 Inch Rotor
    (Part #10672411002)
    x
                

    Design, innovation, and strength are combined to give the F88i Caliper series unique performance advantages. Structural integrity is greatly increased due to an exclusive internal interlock system that requires less brake pedal effort, yet increases braking control with lap after lap consistency. 

    The result: more consistent pedal feel and stopping performance with less pad taper. These calipers are machined from billet 6061-T6 aluminum and feature internally machined lightening pockets, which makes them one of the lightest calipers on the market.

    The high performance caliper of choice for Rocket Chassis.

    Replaces SL and XL type calipers. 3.50" mounting centers. 

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

    Caliper Piston Tech Note (Link)

     

  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly, 5.1:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly, 5.1:1
    (Part #91029987)
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 5.1:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • US Brake Swing Mount Dual Master Cylinder Pedal
    US Brake Swing Mount Dual Master Cylinder Pedal
    (Part #91029985)
    x
                

    This combo pairs a Wilwood pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", or 1".

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • AFCO 7241-1203 F33i Series Caliper, 1.38 Inch Bore, 1.25 Inch Rotor
    AFCO 7241-1203 F33i Series Caliper, 1.38 Inch Bore, 1.25 Inch Rotor
    (Part #10672411203)
    x
                

    Advanced technology allows the F33i caliper to outperform the competition. Four unique, locking sleeves increase the caliper's structural integrity and resistance to distortion. Lower pedal effort, less brake pad taper, and more consistent lap times make this caliper the winner's choice. Machined from billet 6061-T6 aluminum, these calipers are the hot set-up for todays serious racer.

    • Innovative internal construction locks together the caliper halves for increased rigidity; extra rigidity provides more consistent stopping performance and less brake pad taper
    • Ultra-high temperature resistant square-cut seals resist damage caused from heat and wear
    • Billet-machined 6061-T6 aluminum construction provides maximum strength
    • Bore Diameter: 1.38"
    • Disc Width: 1.25"

    Note: Replaces DL type calipers, 5.25" mounting centers.  Commonly used on late models or sprint cars.

  • AFCO 7241-1001 F88i RH Rear Aluminum Caliper-1.88 Bore/1.25 Inch Rotor
    AFCO 7241-1001 F88i RH Rear Aluminum Caliper-1.88 Bore/1.25 Inch Rotor
    (Part #10672411001)
    x
                Please view the product's page for more information
            
  • US Brake Dual Master Cylinder Floor Mount Pedal
    US Brake Dual Master Cylinder Floor Mount Pedal
    (Part #91029986)
    x
                

    This combo pairs a Wilwood floor mount pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    US Brake Master Cylinders

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Has a 6:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", 1".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Garage Sale - U.S. Brake Staight Vane Rotor
    Garage Sale
    Garage Sale - U.S. Brake Staight Vane Rotor
    (Part #UP12521)
    x
                

    U.S. Brake's disc brake rotors set the pace for design, quality and performance. Special designed materials, enhanced computer imagery and design, as well as extensive lab and track testing have yielded a superior brake rotor. All U.S. Brake rotors have been optimized for strength, weight, and heat dissipation ability to meet the demands of the serious racer.

    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and Blanchard ground to assure precise flatness
    • Precise vane placement for high volume cooling

    Clearance item!!

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - U.S. Brake Straight Vane Rotor
    Garage Sale
    Garage Sale - U.S. Brake Straight Vane Rotor
    (Part #UP12487)
    x
                

    U.S. Brake's disc brake rotors set the pace for design, quality and performance. Special designed materials, enhanced computer imagery and design, as well as extensive lab and track testing have yielded a superior brake rotor. All U.S. Brake rotors have been optimized for strength, weight, and heat dissipation ability to meet the demands of the serious racer.

    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and Blanchard ground to assure precise flatness
    • Precise vane placement for high volume cooling

    Clearance item!!

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - US Brake Master Cylinder, .875 Inch Bore
    Garage Sale
    Garage Sale - US Brake Master Cylinder, .875 Inch Bore
    (Part #UP40086)
    x
                Please view the product's page for more information
            
  • Garage Sale - Specialty 10 Inch Drilled and Slotted Drag Race Rotor
    Garage Sale
    Garage Sale - Specialty 10 Inch Drilled and Slotted Drag Race Rotor
    (Part #10698505000AF)
    x
                U.S. Brake's disc brake rotors set the pace for design, quality and performance. Special designed materials, enhanced computer imagery and design, as well as extensive lab and track testing have yielded a superior brake rotor. All U.S. Brake rotors have been optimized for strength, weight, and heat dissipation ability to meet the demands of the serious racer. 

    Bolt Circle 3.875"  DIA 10"  Mount 5"

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

     

  • Garage Sale - US Brake Specialty Drilled and Slotted Rotors
    Garage Sale
    Garage Sale - US Brake Specialty Drilled and Slotted Rotors
    (Part #10698505005)
    x
                

    U.S. Brake's disc brake rotors set the pace for design, quality and performance. Special designed materials, enhanced computer imagery and design, as well as extensive lab and track testing have yielded a superior brake rotor. All U.S. Brake rotors have been optimized for strength, weight, and heat dissipation ability to meet the demands of the serious racer.

    • 8 mount hole rotor
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and Blanchard ground to assure precise flatness
    • Precise vane placement for high volume cooling
     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS