|
#54535500
$29.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Need help?
855.313.9176Liquid/Compound Return Policy
For health, safety, and product integrity reasons, only unopened, sealed items are eligible for return or credit.
Return PolicyMoroso ceramic engine seal coats and seals radiators and cooling systems. Seals minor cracks in engine head and block.
Charts
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 35500 |
| Brand | Moroso |
| GENERAL | |
| GTIN Code | 084663355004 |
| Notes | 1 Pint |
5
8 Reviews
Customers highlight the effectiveness and easy use of our Moroso Ceramic Seal. Known for its sealant quality, it has proven especially beneficial for sealing head studs in older vehicles, saving users time and potential expenses. Notably, it demonstrated rapid results in sealing a head gasket. One noteworthy comment suggests dual application may be required for larger leaks. Users advise adhering to the product instructions for optimal results. Compared to similar options, our product's reliability places it as a go-to choice for many customers.
5
8 reviews
5
8
4
0
3
0
2
0
1
0
Filter by Ratings
I recommend this product
5.0
a year ago
Eric
Napierville, Québec, Canada
Verified
Very good product, does its job well
Would Recommend
Haven"t used it yet
5.0
2 years ago
Cat Lady
83330
Verified
Trying to seal a crack in water jacket on 1930 cat high ten. Hope it works!
Would Recommend
I use this stuff all the time in my flatheads - great stuff!
5.0
9 years ago
V8-1
Lexington, KY
Verified
I use the Moroso Ceramic Seal on head studs prior to head installation and initial torque - great stuff
Would Recommend
Great stuff! Saves Time and Money!
5.0
9 years ago
Dr. Zero
Waynesboro, TN
Verified
Although it didn't work this time, this stuff has been a lifesaver in the past! I only tried one bottle. Two might have fixed it , but, the old Caravan has just cost us too much. In down time and money. If you have any doubts about this product, don't! Unless your leak is huge, it will work! This is the first time I've known it not to work,but the leak was just to big.
Would Recommend
Stud seal
5.0
10 years ago
Vintageiron
Southern, Oregon
Verified
Perfect material for sealing the studs on my Flathead.
Would Recommend
seems to do the job
5.0
10 years ago
Donny
Eagle , Idaho
Verified
Seems to do the job - to bad you could not just add it with out flushing it first .
Would Recommend
It works.
5.0
12 years ago
Tark
Sanger, TX
Verified
After a total engine rebuild, the flathead engine in my 1940 Ford leaked from every pore. Before installing the Moroso product, I removed the cylinder heads and applied a thread sealer (procured locally) to the stud threads in the engine block. After starting the engine again, the leaks continued for a few minutes but gradually stopped. Needless to say, I was very pleased.
Would Recommend
WORKS GREAT.
5.0
15 years ago
MVB
SC
Verified
I FOLLOWED DIRECTIONS AND IT SEALED MY HEAD GASKET WITHIN MINUTES.
Would Recommend
Showing 8 of 8 reviews
2 Questions • 4 Answers
After using the ceramic seal (As the directions say ) , is it OK to refill radiator with anti-frezze as usual? Cuz the leak went away instantly in the thermostat housing but now is starting to leak again only one week later. What should I do? 2nd ceramic or all wheater seal? Thanks
by William
• 8 years ago
3 answers
View Answers
Will this product not work if I use anti-freeze in the block? Will be used on a Ford flathead. Thanks, Bill
by Winslow
• 13 years ago
1 answer
View Answer
2 of 2 questions shown
