McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

LS1 Fuel Filter/Fuel Regulator Kit

Specs
Material Type:
Steel
Overall Height:
5.75
Overall Length:
6.00
Sold in Quantity:
Kit
Finish:
Zinc
Pressure Rating:
58 lbs
Outside Diameter:
2.23
Filter Element Type:
Paper
LS1 Fuel Filter/Fuel Regulator Kit
LS1 Fuel Filter/Fuel Regulator Kit
LS1 Fuel Filter/Fuel Regulator Kit
LS1 Fuel Filter/Fuel Regulator Kit

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

To make your LS1 swap a little less painful, we put together these 2-in-1 fuel filter and fuel pressure regulator fitting kits for you. If you don't have a fuel pump or need an external pump, order the filter/regulator/pump kit 910-12805. 

This kit includes required fuel rail fitting along with the filter/regulator assembly. The EFI fuel regulator pressure is fixed at 58 psi. Hose and additional fittings sold separately.

  • Principal Application:  Chevrolet Corvette (99-04)
  • Style:  Fuel (Complete In-Line) Filter
  • Service:  Fuel
  • Type:  Full Flow
  • Media:  Paper
  • Nominal Micron Rating:  5

Notes

The inlet side of this filter/regulator is the end with the (2) male port tubes.  The larger 3/8" tube is the pressure inlet from the pump.  The smaller 5/16" tube is the return to the tank.  The female side of the filter assembly utilizes the male 'snap' in fitting.  This is the outlet side of the filter for the line to the fuel rail of the engine.

Customer Reviews

Rated 4.8 out of 5 by 9 reviewers.
RATING BREAKDOWN
9 reviews
5 Stars
7
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Coty
Verified Purchaser
Ashland ky
Product Rating

This kit worked perfectly

January 29, 2015
Bought this for a 68 Chevelle ls swap all fittings needed where included only wish this was offered in black fittings instead of blue. Overall great product
Pros:
  • convenient and compact
Cons:
  • lack of color choice
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

JTurk
Verified Purchaser
Ohio, USA
Product Rating

clean and easy install

August 07, 2014
Installed an my truck build with an LS engine swap. This made the install very quick and easy to do. All fittings and the filter/regulator mounted clean and simple. Haven't run the truck yet, so I'll have to update once everything is operating. Speedway shipping on these parts was very quick.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

red33chevy
Verified Purchaser
Louisville, Ky
Product Rating

Great Product and Value

June 29, 2014
Great combination, Everything you need to get the job done, second time that I have bought this combination, Speedway always has very fast shipping
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Skully
Charlotte, NC, USA
Product Rating

Very Nice package for my LS conversion

January 04, 2014
I had been looking around at various options and this made life easy. With such a custom build, having this along with the fittings made this part of the job come together quickly. The quality is very good and the fittings are top shelf. thank you SPEEDWAY!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

kahuna
Rome, GA, USA
Product Rating

Works great for my ls1!

September 05, 2013
Bought this for a ls1 I installed in my 68 Chevy pickup. Plumbed up easy, VERY SATISFIED !
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

hessdawg
Verified Purchaser
monterey
Product Rating

best deal around

October 01, 2011
you will not find this cheaper. quality wix filter and russel adapters
Pros:
  • Quality Construction
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Frankinstang
Verified Purchaser
NE, Georgia
Product Rating

Perfect Kit! Great Price!

March 11, 2012
Easy to use, good fit, and looks good!
Pros:
  • Safe
  • Quality Construction
  • Easy To Use
  • Made the LS swap a snap
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

1Lime69
Verified Purchaser
Summerville, SC
Product Rating

excellent value

October 11, 2011
The ls1 conversion in my 68 Camaro went smoothe with the filter/an fitting package and installed with ease. Best value found. Shipping was quick. Wil do business again.
Pros:
  • Best value great quality
  • Easy To Use
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Snowshoe
Product Rating

BEST PRICE ANYWHERE

October 09, 2012
This is a 5.3 engine swap and will allow a smooth transition
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

26 questions : 30 answers

Do you have a diagram showing how to install the small plastic part Is the small plastic part in the box used on the fuel outlet side with the russel part # 640940. Can you show how to use it correctly

2 answers
tommy2
ga
February 17, 2015

Do you have a diagram showing how to install the small plastic part Is the small plastic part in the box used on the fuel outlet side with the russel part # 640940. Can you show how to use it correctly

Answers

February 17, 2015
tommy2
I am asking if the plastic part included in the box is to be used with the Russel part # 640940 and if so, how to use it , on the outlet side,in THIS Fuel Regulator KIT.
February 17, 2015
EricM
When using the AN adapter fittings in this kit they do not use the plastic piece since they screw together for a positive retention. If you are using adapter fittings which require the plastic retainer then slide the retainer onto the male end of the filter (tabs first) until it rests against the small flange. Then push the adapter over the male end until it locks in place. To remove squeeze the plastic tabs together and pull the adapter off of the filter. I have attached a photo to show the direction that the plastic clips are slid onto the filter.

So is this kit designed to run just hoes and clamps off the back of the pump? I cannot run AN fittings throughout the entire system?

1 answers
Xtronec
California
February 05, 2015

So is this kit designed to run just hoes and clamps off the back of the pump? I cannot run AN fittings throughout the entire system?

Answers

February 05, 2015
EricM
If you do not have a pump that allows for AN connections then yes you would have to clamp hoses or find some other way of connecting a 3/8" ID hose to your fuel pump (AN 6 hose is approximately 3/8" ID). Each installation is different since there is a wide variety of fuel pumps that this filter/regulator can be used with.

Can you get it in different pressure ratings?

1 answers
mike1999
January 23, 2015

Can you get it in different pressure ratings?

Answers

January 23, 2015
EricM
Sorry this is only available with this one pressure setting.

what fitting to use on the fuel rail itself with this system?

2 answers
nukem
Woodstock, AL, USA
January 07, 2015

what fitting to use on the fuel rail itself with this system?

Answers

March 25, 2015
knute
I used the one larger fitting in the kit for the fuel rail on my C5 LS6. I only needed to fabricate a new fuel line from the filter outlet to rail. The other two fittings I didn't use.
January 07, 2015
EricM
The same adapters as used on this filter can be used on the LS engine fuel rails. Adapter 61744120 is for 3/8" fuel rails and 61744110 is for 5/16" fuel rails.

-8AN instead of -6AN? Is there a way I could order -8 AN fittings for the inlet and feed outlet?

1 answers
Bubbacow
January 05, 2015

-8AN instead of -6AN? Is there a way I could order -8 AN fittings for the inlet and feed outlet?

Answers

January 06, 2015
EricM
No we do not offer AN8 fittings for this filter. You will be hard pressed to find fittings in AN8 for this stock style of filter since the filter does not flow near enough fuel to keep up with a fuel pump that requires AN8 hoses. You should consider a fuel filter such as 91012301 and an adjustable fuel pressure regulator like 91013109 if dealing with AN8 hose requirements.

What will I need to do in order to make this work in my 77' nova? I've got a 77' nova that I'm swapping an LS1 into but I have the stock fuel tank. Will this work fine or do I need other parts?

1 answers
SL33PRNova
January 03, 2015

What will I need to do in order to make this work in my 77' nova? I've got a 77' nova that I'm swapping an LS1 into but I have the stock fuel tank. Will this work fine or do I need other parts?

Answers

January 05, 2015
EricM
You will also need an electric fuel pump. We highly suggest the fuel regulator/pump kit 91012806 for your application.

Can this be purchased with black anodized fittings? Doing an LS swap into a Jeep. Just curious about the color of the fittings

1 answers
JEEPINnVA
Lynchburg, VA, USA
November 19, 2014

Can this be purchased with black anodized fittings? Doing an LS swap into a Jeep. Just curious about the color of the fittings

Answers

November 19, 2014
EricM
Yes you can order this kit with black adapters instead of the blue. Simply request black when ordering by leaving a comment at checkout or if you give us a call one of our associates can change the adapters to black when placing the order. The part numbers for the black adapters are 61744113 quantitiy1, and 61744123 quantity 2.

Will this work with LS6 out of a 2004 Cadilac CTS V? I am putting into an 03 s10 which had a 2.2. I'm told the flex fuel fuel pump available for this truck will provide sufficient pressure and volume for this application. Can you confirm this?

1 answers
FastS10
Florida
October 31, 2014

Will this work with LS6 out of a 2004 Cadilac CTS V? I am putting into an 03 s10 which had a 2.2. I'm told the flex fuel fuel pump available for this truck will provide sufficient pressure and volume for this application. Can you confirm this?

Answers

November 03, 2014
EricM
Sorry we do not have specs for the stock fuel pump in your S10 but if it will provide sufficient pressure then this filter/regulator kit will work fine for your LS6 engine.

What is the maximum flow rating on this filter/regulator assembly? I'm needing to know the maximum flow rating on this regulator/filter assembly, in GPH or LPH.

1 answers
moparman20
Kansas, USA
August 17, 2014

What is the maximum flow rating on this filter/regulator assembly? I'm needing to know the maximum flow rating on this regulator/filter assembly, in GPH or LPH.

Answers

August 18, 2014
EricM
This is a stock replacement filter for a Corvette application. Sorry the manufacture does not have a flow rating on this filter.

What components will I need for the fuel system in a 99' Jeep TJ with a 5.3 Vortex?

1 answers
Kidrains
Kansas, USA
August 07, 2014

What components will I need for the fuel system in a 99' Jeep TJ with a 5.3 Vortex?

Answers

August 08, 2014
EricM
This fuel filter/regulator kit comes with the adapters needed to convert the ends of the filter and the fuel rails on the engine to AN 6 connections. You will then need AN 6 hose and hose ends such as 620206 hose and 6202002 or 6202016 hose ends.
Page 1 of 3

You may also be interested in:

Auto Meter 2177 Auto Gage Mechanical Pressure Gauge, 1-1/2 Inch, 0-100
(Part #1822177)
                        

These 1-1/2" rugged hi-vibration pressure gauges are made to mount directly on the engine to read fuel or oil pressure. Built tough to take it. 1/8" NPT male thread.

1-1/2" Pressure Gauge Installation Instructions (PDF)

LS1 Complete Fuel Delivery Kit
(Part #91012805)
                        

To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

LS1 Fuel Filter/Fuel Regulator Only
(Part #91012807)
                        

To make your LS1 engine swap a little less painful, we stock this 2-in-1 fuel filter/fuel pressure regulator assembly. This non-adjustable fuel regulator has a fixed pressure at 58 psi. Hose and additional fittings sold separately.

  • Principal Application:  Chevrolet Corvette ('99-'04)
  • Style:  Fuel (Complete In-Line) Filter
  • Service:  Fuel
  • Type:  Full Flow
  • Media:  Paper
  • Nominal Micron Rating:  5
Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
(Part #91071501)
                        

FueLab mechanical fuel pressure gauges featurea black housing with a white face and black text.

  • For use on regulators or fuel rails with gauge ports
  • Direct mount 1/8” NPT fitting
  • 1.5” diameter gauge face
  • Not for use in passenger or driver’s compartments
Hi-Pressure EFI Fuel Filter
(Part #91034190)
                        

The modern fuel injected engine requires a much finer fuel filter to protect the injectors. This is made of steel. This is a 10 micron fuel filter and is rated up to 60PSI, flows up to 120 gph and is a necessity for any EFI conversion. It includes an AN 6 inlet and outlet. Mounting bracket included.

 

Russell 641600 LS/Hemi Complete EFI Fuel System Retrofit Kit, Red/Blue
(Part #325641600)
                        

This Russell Performance electronic fuel injection system kit provides a complete fuel system for GM LS-series and Chrysler Hemi engine swaps in muscle cars, street rods and off-road vehicles. These kits include an in-line Edelbrock electric fuel pump, regulator/fuel filter assembly, fuel pump relay and wiring assembly, fifteen feet of Russell ProFlex hose, plus an assortment of traditional red and blue AN hose ends, adapters and mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

  • For GM LS-series and Dodge 5.7L Hemi engine swaps into older non-EFI vehicles
  • Can support up to 600 hp at 40 psi
  • Includes Edelbrock Electric Fuel Pump # 3594
  • Includes Edelbrock Fuel Pressure Regulator
  • Returnless Fuel System
Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
(Part #325641605)
                        

This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

  • For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
  • Includes Edelbrock Electric Fuel Pump # 3594
  • Includes Edelbrock Fuel Pressure Regulator
  • Returnless Fuel System
  • Supports up to 450 HP
Walbro GSL392 Inline Racing Fuel Pump
(Part #960392)
                        These aluminum racing Walbro GL392 inline fuel pumps feature a 255 LPH free flow rate and 60 psi maximum pressure.  They have a lightweight, compact design for durability and simplicity.
  • Overall Length: 6.44"
  • Outside Diameter: 1.70"
  • Aluminum material
  • Natural finish
  • 255 LPH free flow rate
  • 60 psi maximum pressure
  • 10mm X 1.0 inlet size
  • One inlet, female threads
  • 10mm X 1.0 outlet size
  • One outlet, female threads
  • Lightweight, compact design
  • Hardware NOT included

Be sure to include our hardware installation kit and AN 8 fitting for these Walbro GL392 inline fuel pumps before purchasing. (960929 and 9603040)

Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
(Part #91018688)
                        These universal kits work on any 6" to 12" deep fuel cell even with uneven sealing surfaces.  Mounts your pump in tank and features a return line and a vent line.
  • 340 Stealth Fuel Pump
  • Supports up to:
    • 700 HP EFI Supercharged
    • 1000 HP Carbureted Supercharged
  • Black anodized hanger assembly
  • (3) ORB-06 Ports – Supply, Return, Vent
  • Fuel resistant baffle / basket (Includes: Foam and Bladder)
  • Universal high flow pre-pump filter
  • Modular design can be cut to height to fit almost any fuel tank
  • EFI or Carbureted
  • Turbine pump mechanism increases durability.
  • Must be used with a return style system
  • In-tank use only

Fuel Injected Systems Specs and Recommendations Chart (Link)

Carbureted Systems Specs and Recommendations Chart (Link)

LS1 Fuel Filter/Regulator Pump Kit
(Part #91012806)
                        

Outfit the fuel system for your LS1 swap with these fuel filter/regulator pump kits.  They feature a Walbro GL392 inline fuel pump (960-392) with all necessary mounting hardware and fittings for a successful installation.  These pumps have a lightweight, compact design for durability and simplicity.

  • Aluminum racing pump
  • 255 LPH free flow rate
  • 60 psi maximum pressure

Includes:

  • (1) Walbro 960-392 Inline Fuel Pump
  • (1) Walbro Installation Kit with Bracket
  • (2) -6 AN Fittings for Walbro
  • (1) LS1 Fuel Filter/Regulator
  • (1) -6 AN to 3/8" Push-On for EFI fitting
  • (2) Blue LS1/LT1 -6 AN-3/8" fittings
  • (1) Blue LS1/LT1 -6 AN-5/16" fitting