LS1 Fuel Filter/Fuel Regulator Kit

							                        

                                                        
If you are swapping a LS1 or LT1 into your hotrod, you will need these fuel line adapters. They snap right onto your existing quick disconnect on the hard line and allow you to use AN6 fittings and hose. The 3/8" is for the fuel feed line and the 5/16" is for a return line if needed.
Clearance!
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
                                                    

						                        

							                        

                                                        
To make your LS1 transplant a little less painful, we put together these  kits for you. If you already have a fuel pump in the tank, use the  filter/regulator kit 910-12800. 

This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @  80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.
Hose and additional fittings sold  separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate  fuel injection hose clamps for the pressure side of the pump.
                                                    

						                        

							                        

                                                        
To make your LS1 engine swap a little less painful, we stock this 2-in-1 fuel filter/fuel pressure regulator assembly. This non-adjustable fuel regulator has a fixed pressure at 58 psi. Hose and additional fittings sold separately.
Principal Application:  Chevrolet Corvette ('99-'04)
Style:  Fuel (Complete In-Line) Filter
Service:  Fuel
Type:  Full Flow
Media:  Paper
Nominal Micron Rating:  5
                                                    

						                        

							                        

                                                        
The modern fuel injected engine requires a much finer fuel filter to protect the injectors. This is made of steel. This is a 10 micron fuel filter and is rated up to 60PSI, flows up to 120 gph and is a necessity for any EFI conversion. It includes an AN 6 inlet and outlet. Mounting bracket included.
 
                                                    

						                        

							                        

                                                        
This Russell Performance electronic fuel injection system kit provides a complete fuel system for GM LS-series and Chrysler  Hemi engine swaps in muscle cars, street rods and off-road vehicles.  These kits include an in-line Edelbrock electric fuel pump,  regulator/fuel filter assembly, fuel pump relay and wiring assembly,  fifteen feet of Russell ProFlex hose, plus an assortment of traditional red and blue AN hose ends, adapters  and mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.
For GM LS-series and Dodge 5.7L Hemi engine swaps into older non-EFI vehicles
Can support up to 600 hp at 40 psi
Includes Edelbrock Electric Fuel Pump # 3594
Includes Edelbrock Fuel Pressure Regulator
w/ Returnless Fuel System
Comes complete with instructions for an easy installation
                                                    

						                        

							                        

                                                        
This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler  5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.
For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
Includes Edelbrock Electric Fuel Pump # 3594
Includes Edelbrock Fuel Pressure Regulator
w/Returnless Fuel System
Supports up to 450 HP
Comes complete with instructions for an easy installation
 
 
Note: This item is incorrectly listed for $94.99 in our catalog #349. Please note the current price listed on our website is correct. We apologize for any inconvenience or confusion that this has caused.
                                                    

						                        

							                        

                                                        These universal kits work on any 6" to 12" deep fuel cell even with uneven sealing surfaces.  Mounts your pump in tank and features a return line and a vent line.
340 Stealth Fuel Pump
Supports up to:
700 HP EFI Supercharged
1000 HP Carbureted Supercharged
Black anodized hanger assembly
(3) ORB-06 Ports – Supply, Return, Vent
Fuel resistant baffle / basket (Includes: Foam and Bladder)
Universal high flow pre-pump filter
Modular design can be cut to height to fit almost any fuel tank
EFI or Carbureted
Turbine pump mechanism increases durability.
Must be used with a return style system
In-tank use only
Fuel Injected Systems Specs and Recommendations Chart (Link)
Carbureted Systems Specs and Recommendations Chart (Link)