Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Howe Racing 5225 Basic Steering Quickener, 1.5:1, 3/4 Inch 36-Spline

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

Howe Basic Steering Quickeners are made to meet the requirements of the job with no frills to keep the cost down. It has undergone extensive cycle and load testing to make sure that durability has not been comprimised. Thanks to the alloy steel gears and unique tooth design, it is far stronger and more durable than any other small housing quickener on the market. 

3/4" 36-spline input and output. 8" overall length.

Specs

  • Overall length approximately 8 inches
  • Overall height from mounting surface 3 inches
  • Height from base to center of the input 1 ½ inches
  • Height from base to center of the output 1 ¾ inches
  • Housing length 5 ¼ inches

You may also be interested in:

Howe Racing 5224 Basic Steering Quickener, 2:1, 3/4 Inch 36-Spline
                        

Howe Basic Steering Quickeners are made to meet the requirements of the job with no frills to keep the cost down. It has undergone extensive cycle and load testing to make sure that durability has not been comprimised. Thanks to the alloy steel gears and unique tooth design, it is far stronger and more durable than any other small housing quickener on the market. 

3/4" 36-spline input and output. 8" overall length.

Sweet Mfg Steering Coupler, 3/4 36-Spline, 3/4 Rnd Non-Flex, GM Man/Mustang II
                        

Steel coupler is splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D.

When ordering, select applicable hole size/spline needed.

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Sweet Mfg Steering U-Joint, 3/4 36-Spline to 3/4 Round, GM Manual/Mustang II
                        

Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  •  3/4"-36 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.