Engineered for the custom builder, or to retrofit motorcycles not equipped with self-canceling turn signals. Designed for use with individual momentary type turn signal switches mounted on the left and right handle bars. This unit will not work on bikes that have the left and right turn signal switch built into one unit that you must push to cancel.
Requires two taillight bulbs per side.
910-64050 Instructions (pdf)
Three Turn Signal Timing Modes - self canceling.+ Hazard Mode - non-self canceling. Non-Load Dependent Flash Duration - flash time constant whether using incandescent or LED lighting. Dependable Solid-state electronic components. Weather Proof - potted with soft cell technology to prevent wire chaffing and damage.
Here's how it works:
- Press the appropriate button for 1 second and the turn signal light will flash for 7 seconds, then self cancel.
- Press for 2 seconds and it will flash for 20 seconds, then self cancel.
- Press for 4 seconds and it will flash for 75 seconds, then self cancel.
- Press the same button a second time to manually cancel.
- To activate the hazard flashers, press both buttons at once. To disengage, press again. (They will flash until disengaged).
- 12 VDC negative ground
- Max load capacity: 6 amps per left or right channel
- Dimensions: 2 1/4" L x 1 5/8" W x 5/8" H
- Mounting: Secure to flat surface with double-sided tape (included)
Reviews for Item #: 91064050