|
#9106880
Out of Stock
This item is currently not available
Shop all Ford Racing Oil Pans
Many Engines, 3.00" Outside Diameter
Need help?
855.313.9176Ineligible for Return
Contains items that cannot be returned
There are times you just don't have room for the oil filter on your Ford powered toy. This adapter attaches where the oil filter mounts and turns the filter 90 degrees. Rotate filter toward front of engine to provide clearance for engine swaps and chassis modifications.
Fits most Ford V8 and some 4 cyl. engines that use Fram PH8A/HP1 or Motorcraft FL-1A oil filters.
4.9
14 Reviews
Our product received high praise by customers for its quality construction and practicality, with its fit being a highlighted aspect. The oil filter adapter was effective in solving clearance issues in a variety of engines, enhancing usability. Many mentioned that it made oil filter replacements easier, indicating its role as a problem solver. The adapter was also complimented for preventing oil drain back, indicating safety improvements. Customers appreciated its versatility and would purchase again, noting its value as superior to competitors. The material quality was praised as well, with a special note of it being a Ford factory part.
4.9
14 reviews
5
12
4
2
3
0
2
0
1
0
Filter by Ratings
Good product great fit
5.0
6 years ago
Andrew
Caldwell, ID
Verified
Used the adapter to fit with an oil cooler conversion on a Ford 460 on a 1992 F250. With a narrow style oil cooler adapter all the pieces fit together in the stock location.
Would Recommend
if needed would buy again
5.0
7 years ago
Toni
Reedsport,Or
Verified
it is a good product am pleased
Would Recommend
Won't work with a mechanical fuel pump
4.0
7 years ago
KennyR
K'ZOO,MI
Verified
Hits the oil pan if you try to set the filter vertically,hits the fuel pump when you rotate it to the front and hits the motor mounts if you go the other direction. Should be fine when I take off the fuel pump a put on a block off plate.
Would Recommend
I would buy this product again
5.0
8 years ago
stub
AZ HARDCHROME
Verified
This is exactly what I was looking for
Would Recommend
Ford factory part, excellent quality
5.0
8 years ago
Tony
Canyon Lake,TX
Verified
Perfect. It's a Ford factory made oil filter adapter. Good price, shipped quickly
Would Recommend
Problem solver
5.0
8 years ago
Haywood
Denton, TX
Verified
In my case, it was installed to prevent oil drain back, Even when using the best oil filters, if the vehicle sits more than it is driven, some, or all can drain back from the filter to the pan. This part, when oriented so the filter is vertical, hanging down, makes that a physical impossibility, You definitely need a little grease to keep the o-rings in place during install, as they are a bit flimsy, and there would be zero tolerance for one of them not being in the groove when you tighten it down. Over all well made and a good value.
Would Recommend
yes i would buy it again
5.0
8 years ago
Miff
little rock arkansas
Verified
it worked great for my project saved me some work delivery
Would Recommend
Just what I needed, and well engineered.
5.0
9 years ago
Pat
Tucson, AZ
Verified
I am building a '51 Ford Victoria, and am putting the 351 W engine into it. The oil filter had a problem with not being able to remove and replace, so this fixed the problem. The easy remedy was to use a smaller oil filter, but this allows me to continue to use the easily available full size oil filter. I'm happy.
Would Recommend
This adapter solved my clearance problem
5.0
9 years ago
Jim
Gimli, Manitoba, CANADA
Verified
With the original oil filter mount my oil filter was rubbing on the motor mount. This adapter solved that problem.
Would Recommend
Fits Rover V8
5.0
10 years ago
Blown v8
U.K.
Verified
Really well made,very easy to use
Would Recommend
Showing 10 of 14 reviews
6 Questions • 7 Answers
will this adapter work on a 383 mopar,uses the same filter ed
by ed
• 8 years ago
1 answer
View Answer
Good Morning. Does this kit work on y-block 292? Thankful.
by Joao Fernando
• 8 years ago
2 answers
View Answers
Adapter fits directly to Block or the original filter adapter? My 57 tbird 312 engine.. The spin on oil filter actually attaches to a plate that is the adapter used to convert over from the old style canister filter to the newer spin on. Does this 90 deg attach to that adapter or directly to the block?
by Hoppy57
• 11 years ago
1 answer
View Answer
Can this adapter be rotated in any direction an still work. I need to turn the filter 90' from stock and then rotate it 45' fro vertical. All this to clear my steering shaft.
by Bkentrhoads
• 12 years ago
1 answer
View Answer
will this fit on a ford 351m/400 engine?
by Pat
• 14 years ago
1 answer
View Answer
Could someone describe how this attaches; does that bolt thingy just screw onto the threads of the original mount? What are the dimensions of this adapter (LxWxH) and what is the thread size and pitch? It looks like this would fit on my Toyota Landcruiser
by bobbie51
• 15 years ago
1 answer
View Answer
6 of 6 questions shown
