F-Body LS1 High Mount P/S and Alternator Relocation Bracket

#4811004

F-Body LS1 High Mount P/S and Alternator Relocation Bracket

13 Reviews

20 Questions

If you want to move your factory F-body power steering pump and alternator up to the driver side head, this is the bracket for you
It allows you to retain your original LS1 alternator, balancer, A/C bracket and compressor
Cap on an 00 F-Body LS1 P/S Reservoir is 1-3/4" higher than the top of the Throttle Body

Out of Stock

This item is currently not available

Shop all Speedway Motors Accessory Mounting Brackets

Product Summary

LS1

If you want to move your factory F-body power steering pump and alternator up to the driver side head, this is the bracket for you
It allows you to retain your original LS1 alternator, balancer, A/C bracket and compressor
Cap on an 00 F-Body LS1 P/S Reservoir is 1-3/4" higher than the top of the Throttle Body
Centerline of water pump pulley to outside edge of alternator = 16"
Includes a billet aluminum bracket, belt and hardware

See more details

Need To Know

Need help?

855.313.9176

View the Help Center

Ineligible for Return

Contains items that cannot be returned

Installation Details

Power Steering Pump Brackets Installation Instructions (4811004)

Installation Tips

This bracket is designed for LS1 F-body power steering pump and reservoir assembly and alternator that came on all 1998-2002 Camaro/Firebird models equiped with the 5.7l LS1 engine, for alternate applications an F-body power steering pump is requred.

If you are installing this with "Truck Style" water pump and lower pully then you will still need to use a power steering pump and reservoir assembly from a F-Body car.

The truck alternator however can be reused with this bracket. The "Truck Style" will requie a different hardware kit that will be used that comes with the proper spacers to space the bracket away from the cylinder head for proper pulley alignment.

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)

Details

If you want to move your factory Fbody power steering pump and alternator up to the driver side head, this is the bracket for you. It allows you to retain your original LS1 alternator, balancer, A/C bracket and compressor.

Cap on an 00 F-Body LS1 P/S Reservoir is 1-3/4" higher than the top of the Throttle Body
Centerline of water pump pulley to outside edge of alternator = 16"

Includes a billet aluminum bracket, belt and hardware.

This bracket is designed for LS1 F-body accessories, for alternate applications an F-body power steering pump is requred.

Charts

Installation Instructions (PDF)

Guides & Documents

Power Steering Pump Brackets Installation Instructions (4811004)

Ratings & Reviews

4.2

13 Reviews

Overall Assessment

Customers appreciate the bracket for its straightforward design and simple mounting process, noting it fits well and saves time during installation. Its confirmed qualities include being well-built, sturdy, and ideal for specific mechanics like LS1 swaps and older models such as the '53 Chevy pickup or '69 Camaro. However, many customers caution that the included belt tends to be too short, suggesting future buyers purchase the belt separately. Despite this issue, the general consensus affirms the bracket's quality and practicality, often recommending it for its confirmed compatibility and easy installation.

Write A Review

4.2

13 reviews

Most Liked Positive Review

4.0

Nice piece

This is a nice piece and does relocate the PS and ALT nicely, but doesn't mention ALT needs to be spaced. Not big deal made my own spacers for bracket and ALT to work with truck style water pump and balancer pulley. The belt should have a idler pulley mounted under the power steering pump to get a little more bite on the pulley and move belt inward toward the rest of the drive assembly.

Most Liked Negative Review

2.0

Belt doesn't fit

The bracket works great bolted right into place, went to throw the belt on and it's too short, read the reviews and saw others had the same problem... even tried to install on the water last and it's about an inch too short, I would recommend buying the bracket and going somewhere else for the belt unless you like spending more money.

Filter by Ratings

Sort Reviews

great bracket

5.0

7 years ago

Bauer motorsports

Perris ca

Verified

Great bracket. Was easy to mount and saved so much time. Fit perfect and belt alignment was perfect.

Would Recommend

Well designed, simple mounting

5.0

9 years ago

Verified

Bolted up as it should, no spacers or mods required

Would Recommend

Very nice bracket

4.0

9 years ago

RebelRider

Southeast Texas

Verified

The bracket is very simple, and fits really well. I thought people were just complaining in the reviews, but they are right. The belt is way too small. The idler pulling is maxed out.

Would Recommend

Great product

5.0

9 years ago

Battman

North Alabama

Verified

Always great service and fast shipping.

Would Recommend

Would buy again

5.0

9 years ago

Tim

New ulm mn

Verified

Bolted right on worked great for my 53 chev pickup

Would Recommend

Exactly what I needed. 69 Camaro w/LS1 swap

5.0

9 years ago

Rob

Las Vegas, NV

Verified

Take the time to remove the power steering pulley. Trust me.

Would Recommend

Belt doesn't fit

2.0

10 years ago

Ian moone

Florida

Would Not Recommend

Belt not long enough

4.0

10 years ago

Turbodubb

San Jose ca

Installed on my 04 gto swap in my chevelle. Bracket works great only problem the belt is too small and have to source a different belt.

Would Recommend

True bolt-on

5.0

10 years ago

mcmate

Sweden

Verified

Nice and solid and recommended for your LS1 swap

Would Recommend

Supplied Belt didn't fit , didnt have any idea why

2.0

10 years ago

Mark

Verified

Belt didn't fit Their advice was to go to auto parts store for new one , they didn't have any pulley specs , I bought from belt from summit racing

Would Not Recommend

Load More Reviews

Showing 10 of 13 reviews

Questions & Answers

20 Questions • 10 Answers

Sort Questions

Do you have the part number for the tensioner in photo that bolts to water pump

by Tim

• 7 years ago

1 answer

View Answer

will this fit on a ls2 6.0 or will it fit on a LQ4 6.0?

by korbin

• 8 years ago

1 answer

View Answer

Does anyone have a part number for a little little longer belt? I was able to get mine on, but it's so tight it causes it to squeak.

by Jakwest

• 8 years ago

1 answer

View Answer

I have read the q&a's. You say this kit does not fit the gto engines because spacing is wrong. Isn't the f-body and gto the same spacing? If so then this kit should work. I have 2006 6.0l and like this kit for a 1971 chevelle. The crankshaft pulley and water pump are the same on both engines. Thank you

by Stan

• 8 years ago

1 answer

View Answer

Is this kit run with or with out the ac unit thanks

by Dmoreno

• 10 years ago

1 answer

View Answer

It looks like the alternator sits very close to the steering pulley. Will the larger truck alternator work with this or only f-body alternator?

by Eddie

• 10 years ago

1 answer

View Answer

Has anyone used this on a 69 chevelle?

by Eddie

• 11 years ago

1 answer

View Answer

I have a 2002 f- body LS1 and there is a brake perportioning box almost in the way of where the alternator would be when relocated. Any experience with that? Will it fit in there?

by Mike

• 11 years ago

1 answer

View Answer

Does it interfere with fuel rail covers I want to add the Corvette plastic fuel rail covers. Does the PS reservoir or bracket interfere with the covers?

by GregR

• 11 years ago

1 answer

View Answer

This bracket would I be able to fit a Howe TC power steering pump

by Smithtec466

• 11 years ago

1 answer

View Answer

Load More Questions

10 of 20 questions shown