|
#6172920
$9.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 7/16"-24 Thread Pitch, Steel
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.
Brake Banjo Bolt
Note: To measure what size fitting you have, you will need to measure the outside diameter of the threads and check the tread pitch. To check for thread pitch you will need to count the number of threads you have in 1". It is easier if you have a thread pitch gauge which should be available at your local hardware/bolt supply store. This particular fitting measures 7/16" thread outside diameter and has 24 Threads Per Inch (TPI).
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 6172920 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Zinc |
| GENERAL | |
| Overall Length | 1.04" |
| Thread Pitch | 7/16"-24 |
| Thread Length | .55" |
| Under Head Length | 0.86" |
| Wrench Type | Hex |
| Sold in Quantity | Each |
5
6 Reviews
Customers commend the product for its clear description and easy online location. They laud the convenience offered by its quick and easy install, remarking that it surpasses other competitors in these aspects. The product is favored for high-quality requirements, such as brake system replacements or disc brake conversions, standing out for its practicality and material quality. The product also received specific praise for fitting the Pinto front factory disk caliper perfectly. Many customers state they will repurchase, underscoring their satisfaction and confidence in its performance and quality.
5
6 reviews
5
6
4
0
3
0
2
0
1
0
Filter by Ratings
I will use speedway Motors for future purchases.
5.0
5 years ago
Bill
Dunbarton,NH
Verified
Clear description and easy to locate on-line. Quick and easy install. Overall very happy!
Would Recommend
I will buy this again
5.0
5 years ago
Jackie
Ball Ground,Ga
Verified
Replaced the entire brake system on the roadster I am restoring
Would Recommend
Good quality and value.
5.0
6 years ago
yurky
Canfield, Ohio
Verified
I'm doing some modifications on a disc brake conversion and they worked like I had planned.
Would Recommend
This fits the Pinto front factory disk caliper
5.0
9 years ago
Pinto Wagon
Kansas City
Verified
This was the part needed for the banjo brake lies on Pinto Mustang IIfront disk brakes
Would Recommend
speedway people really helped me a lot
5.0
14 years ago
henry
piqua ohio
Verified
exactly what i needed
Would Recommend
worked fine
5.0
16 years ago
geojunkman
windsor ct
nice fit
Would Recommend
Showing 6 of 6 reviews
1 Question • 1 Answer
What is the shank length?
by
• 14 years ago
1 answer
View Answer
1 of 1 questions shown
