Auto Meter 2268 LS Series Oil Pressure Sender Adapter
Click image to enlarge
Q & A
What's in the Box
This LS Series oil pressure sender fitting allows your aftermarket 1/8" NPT oil pressure sending unit to be installed in place of the OEM oil pressure sender.
When installing aftermarket gauges, the OEM oil pressure sender is not required by the PCM and may be replaced by the aftermarket sender of your choice.
This adapter works with all LS Series motors:
Item Details16mm-1.5 Male to 1/8" Female
You may also be interested in:
Auto Meter 1427 Designer Black Air-Core Oil Pressure Gauge, 2-1/16 In.More Info
Auto Meter 4521 Ultra-Nite Mechanical Oil Pressure Gauge, 2-5/8 InchPrice: $89.99More Info
Auto Meter 5421 Pro-Comp Mechanical Oil Pressure Gauge, 100 PSI, 2-5/8Price: $89.99More Info
Auto Meter 5284 GM LS Sensor Fitting Installation Kit$59.99Price: $49.99More Info
Auto Meter 2277 Temperature Sender Adapter Fitting, 1/8 NPT-M12x1.5More Info
Auto Meter Designer Black Series gauges feature a vintage-style domed lens and a black bezel. Gauge illuminates via an incandescent bulb and "around the dial" lighting. Red and green bulb covers are included for a custom look.
- Includes 1/8" NPT Sender
- Air-Core meter movement
Ultralight Auto Meter gauges with blue anodized bezel are designed for the extreme conditions of dirt track racing. Water proof so they can be hosed off after the races. A glow-in-the-dark face means they don't use light bulbs. Keeps them simple and dry.
2-5/8" Ultra-Nite Tach glow-in-the-dark face eliminates need for light and battery. Sealed case keeps moisture and debris out. For standard or electronic ignition.
These mechanical Pro-Comp Liquid Filled gauges are designed for racing applications with extreme vibrations or violent pounding. The bourbon tube gauge mechanism is encased in a special dampening fluid that absorbs all vibrations. This protection not only provides steadiness to the pointer but also adds longer life to the instrument.
- 2-5/8" O.D.
- Includes 10 ft. nylon tubing with 1/8" NPT fittings
- Includes 1/4'' NPT adapter/fitting
- Illuminates via incandescent bulbs and around-the-dial lighting
- Red and Green bulb covers included
Swapping an GM LS or LQ series engine into your project and trying to figure out how and where to connect all your gauges? This is what you need! This LS Install Kit from Auto Meter includes a full color booklet with step by step instructions and photos documenting the most common installation points for essentials like oil pressure, coolant temp, RPM and more! In addition to the handy manual compiled by Auto Meter's R&D staff, the kit also includes a package of commonly used adapter fittings to assist with the mounting of your gauge sensors, a short depth temperature sensor specific to the LS / LQ installation requirements, and a pull up resistor used when connecting a tachometer to your engine's ECU.
- 10,000 Ohm Pull Up Resistor
- 1/8"NPTF Short Depth Eletric Water Temp Sensor
- M16x1.5 Male to 1/8" NPTF Female adapter for oil pressure
- M12x1.5 Male to 1/8" NPTF Female adapter for water temperature
- For installation of Auto Meter Full Sweep and Short Sweep Electric Gauges ONLY!
This LS Series water temperature sender fitting allows your aftermarket 1/8" NPT water temperature sending unit to be installed in your passenger side cylinder head.
Note: I.D. of this adapter where the sender probe will go through is .309 and would require drilling to approximately 5/16" or .312 for a Stewart Warner sender to pass through.