|
#91048316
$24.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1310 x 1330 Yoke U-Joint Series
| MFG. Part # | 91048316 |
| Brand | Speedway Motors |
| Yoke U-Joint Series | 1310 x 1330 |
| Greaseable | No |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyHigh quality, heat treated forged steel replacement U-joints. This u-joint only works with clips outside the end caps and can be greased. Clips included. The caps do not have grooves for clips.
1-1/16" x 3-5/8" X 1-1/16" x 3-7/32"
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91048316 |
| Brand | Speedway Motors |
| Yoke U-Joint Series | 1310 x 1330 |
| Greaseable | No |
| GENERAL | |
| Cap Diameter A | 1.062" |
| Cap Diameter B | 1.062" |
| Width A | 3.219" |
| Width B | 3.625" |
| Material Type | Steel |
| Notes | 1310/1330 Spicer conversion U-joint. Works only with clips outside the endcaps (included), the caps do not have grooves for clips. |
| Sold in Quantity | Each |
4.8
25 Reviews
Customers consistently applaud the product for its quality and easy installation, emphasized by users successfully adapting it to diverse vehicle models. The match between various components such as Chevy drivetrains, 9" Ford rear-ends, 350 turbos, and even a 565 cubic inch street motor, signpost its versatility. Its confirmed function and precise fit generate trust and repeated purchases. Users regard the u-joint as a superior quality product, demonstrated by flawless fitting and robust performance, offering significant value compared to alternatives.
4.8
25 reviews
5
21
4
3
3
1
2
0
1
0
Most Liked Positive Review
4.0
Seem to be ok.
Had a small issue with these. When pressing in grease it filled only to cups. I kept pumping and only two overflowed. So I hope the other two got some. I might have to lift up the rear wheels and spin the shaft and see if I can get grease to come out. If not I'll have to go get new ones. So I can't recommend these yet.
Most Liked Negative Review
3.0
52 Henry J project
just collecting parts right now as i have the money. will be a while before i have enough to start.
Filter by Ratings
Yes
5.0
6 months ago
Rudy
Phoenix
Verified
Installation was difficult because of the weight of the unit. Worked great
Would Recommend
Seem to be ok.
4.0
8 months ago
Munzie
Kingston Wa
Verified
Had a small issue with these. When pressing in grease it filled only to cups. I kept pumping and only two overflowed. So I hope the other two got some. I might have to lift up the rear wheels and spin the shaft and see if I can get grease to come out. If not I'll have to go get new ones. So I can't recommend these yet.
I will be buying again
5.0
8 months ago
Super speedy
Elkhart In
Verified
Used on race application
Would Recommend
I will be using this again and again have used several
5.0
8 months ago
Superspeedy
Elkhart IN
Verified
Use this product in my pure stock Racecar. And 3 other racecars.
Would Recommend
52 Henry J project
3.0
11 months ago
roadapple
johnson city tn.
Verified
just collecting parts right now as i have the money. will be a while before i have enough to start.
Would Recommend
Would buy again.
5.0
2 years ago
JJ Miller
Eastern NC
Verified
Quality U-Joint. Converted chevy driveshaft to an early passanger car 9 inch ford.
Would Recommend
Great product, I would buy this again.
5.0
2 years ago
Mike
Florence, MS.
Verified
Converting from chevy driveshaft to ford 9" rearend works great.
Would Recommend
I would buy it again
5.0
2 years ago
Chuck
DeKalb Illinois
Verified
Tech support was very helpful and nice
Would Recommend
i would buy this product again
5.0
3 years ago
brian
westford,mass
Verified
The u-joints were for a 66 chevy nova with a 9" ford rear end.
Would Recommend
Yes
5.0
4 years ago
Mike
Augusta Georgia
Verified
Ford 9in swap
Showing 10 of 25 reviews
2 Questions • 2 Answers
what year GM driveshaft do you use for this u-joint to a 8" ford rearend?
by 34tim
• 12 years ago
1 answer
View Answer
what u-joint do i need 700r4 trans to 8 inch ford thanks
by bobby
• 14 years ago
1 answer
View Answer
2 of 2 questions shown
