XS Power S1600 16 Volt Battery, Starting
Universal Fit, 10.24" Overall Length, 6.75" Overall Width, 7.20" Overall Height
- The SAE post terminals comes with 3/8" bolts
- It is vibration resistant and has a rugged ABS case
- Designed to last longer and provide superior cranking power
- Features AGM battery technology and it only weighs 30.5 lbs.
- They are 1" shorter than other 16 volt batteries which makes them easy to install in tight places
XS Power AGM batteries can save you weight and put the power where it is needed. These top shelf batteries are loaded with features, but are still 1" shorter than other 16 volt batteries which makes them easy to install in tight places.
16 Volt Battery - Starting
- SAE Post Terminals included w/ 3/8" bolts
- Weighs only 30.5 lbs.
- AGM Battery Technology
- Longer Life
- Superior Cranking
- Fast Charge Capability
- Vibration Resistant
- Rugged ABS Case
NOTE: When using a 16 volt battery, you will need to install a 16 volt to 12 volt step down box. The box allows you to run 12 volt items without burning them out. Also, be sure to use a charger designed for 16V batteries.
16 Volt Battery - Starting (913-1000)
- Weight: 30.5 lbs.
- Dimensions: 10.24" L x 6.75" W x 7.20" H
- Max Amps: 2000 @ 80° F
- RC Minutes: 50
- CA: 500A @ 32° F
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
More Like This
XS Power S925 12 Volt AGM Power Cell Battery
XS Power D1600 16 Volt Battery, Deep Cycle
XS Power D925 12 Volt Deep Cycle AGM Battery, 6.5 x 7 x 5 Inch
Optima Batteries 9022-091 Group 75/25 12V Red Top Battery
Optima Batteries 9010-044 6-Volt Red Top Battery, 800 CCA
Braille B2015 No-Weight Battery, 425 CCA
XS Power D680 12 Volt Deep Cycle AGM Battery, 7.28 x 6.67 x 3.19 Inch
XS Power 993 16V-12V Step Down Box
XS Power D1200 12 Volt Deep Cycle AGM Battery, 7.8 x 6.69 x 6.54 Inch
Odyssey Batteries PC925 Extreme Series Battery, 330 CCA
Q & A
There are 3 basic automotive battery designs in use today. Here is some information about each.
Pat talks about our red solid core spark plug wire and rajah ends.
Looking for an easy performance upgrade to your ignition system? MSD's line of Ignition Control Boxes offer extreme improvements to drivability and high rpm applications. Here's a look at the differences between the 6 series line-up.
Need a battery box housing unit? Follow this step by step guide on how to modify a retro cooler to house a battery box. See how to secure the battery box to a car floor.
Jeff demonstrates how to install the front runner drive system by Vintage Air in his 1967 Chevelle project car all while maintaining a simple, factory fresh look.
Learn the difference between an ammeter and voltmeter. We also cover replacing an ammeter with a voltmeter to ensure your gauge works on your street rod.
Speedway Motors employee Jess M. talks about the custom battery tray and cables she built for her '33 Ford.