Wilwood Combination Remote Fill Master Cylinder Kit
Oval Track Cars, Firewall/Frame Position, Disc Brake System Type, Single Outlet Count, Natural
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Six different bore sizes and four different installation configurations are available in this master cylinder kit. Precision machined from high strength aluminum, this kit includes both small and large size reservoirs which can be mounted for more convenient service access. Standard mounting bolt hole configurations provide easy applications for racing and off road vehicles, specialty cars, recreation and industrial vehicles.
Bore sizes available include: 5/8", 3/4", 7/8", 13/16", 1", 1-1/8".
- Includes small and large reservoirs which can be direct or remote mounted
- Aluminum cylinder with plastic reservoir tank
- Mounting flange is a vertical pattern on a 2-1/4" on center
- Master cylinder has a single 3/8-24 brake line outlet
- The two side mount holes are 3" from center to center
70174 Instructions (PDF)
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
Tech Tip: The bigger the master cylinder, the more fluid you get...But you'll have less pressure at the caliper.
- .625" = 5/8"
- .750" = 3/4"
- .875" = 7/8"
- .8125" = 13/16"
- 1.00" = 1"
- 1.125" = 1-1/8"
More Like This
Wilwood Compact Master Cylinder
Wilwood High Volume Aluminum Master Cylinder
Wilwood 260-13622 Remote Flange Mount Master Cylinder Kit, 1"Bore
Wilwood 260-13624 Remote Side Mount Master Cylinder Kit, 7/8"Bore
Wilwood 260-13618 Remote Flange Mount Master Cyl. Kit, 5/8"Bore
Wilwood 260-13620 Remote Flange Mount Master Cyl. Kit, 13/16"Bore
Wilwood 260-5520 Kart Master Cyl. Assembly w/ Bracket, 1/2" Bore
AFCO QM916 Billet Master Cylinder, 7/8 Inch
AFCO QM915 Billet Master Cylinder, 3/4 Inch
AFCO Integral Reservoir Master Cylinder
Q & A
Anytime you purchase a new master cylinder, it's important to remove all the air before installing it. Here is a very helpful video tutorial that will show you how to bench bleed a new master cylinder.
Tim talks about brake booster adjustment.
Speedway Motors employee Pat O. talks about the CPP Hydroboost Brake System.
Tim talks about why using a new pedal assembly may be better for your project than the original pedal assembly.
After getting the control arms and drop spindles installed last time, we are dying to see what it looks like on the ground. Today we are working with the Speedway Deluxe Disc Brake Kit. Josh and Joe are on a roll!