Wilwood 260-13706 Residual Pressure Valve, 2 PSI, Blue
These in-line pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in disc brake systems. Residual pressure valves are made from billet aluminum with 1/8" npt female threads for the inlet/outlet and color coded for easy identification. Ideal for drag racing, circle track, street rod and many off road applications.
The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag.
- Aluminum construction
- Anodized finish
- For in line use
- 2 psi
- 1/8" NPT
- Sold each
Features a distinctive blue anodized finish with 1/8" NPT port at each end. Use 2 PSI residual valves for disc brake applications only. Inverted flare or AN threaded adapter fittings to the 1/8" NPT female thread will be required and are noted below and available as required.
Brake System Builder's Tip (Link)
Learn more about the proper uses of residual valves by reading our tech article, Brake System Selection.
More Like This
Speedway Disc Brake Residual Valve, 2 PSI, Purple
Speedway Disc Brake Residual Valve, 2 PSI, Polished
Wilwood 260-13783 Blue 2 PSI Residual Pressure Valve with Fittings
Wilwood 260-13784 Red 10 PSI Residual Pressure Valve with Fittings
Wilwood 260-13707 Drum Brake 10 PSI Residual Pressure Valve, Red
Speedway Drum Brake Residual Valve, 10 PSI, Purple
Speedway Drum Brake Residual Valve, 10 PSI, Polished
Disc Brake Residual Pressure Valve, 1/8 NPT, 2 PSI
Drum Brake Residual Pressure Valve, 1/8 NPT, 10 PSI
Q & A
Tim demonstrates the brake assembly with a Wide 5 drum brake and Speedway's new self-energizing backing plate.
Tim explains the process of adjusting Buick Finned Drums to fit Speedway's self-energizing backing plate assembly.