Wilwood 140-14100-D Dynapro Radial Front Drag Brake Kit, Black
Front Position, 5 on 4.5" Bolt Pattern, 12.90 Inch Rotor Diameter, Solid Rotor Type, Gray
- This item ships directly from the manufacturer. It may take an additional 3 business days for Wilwood to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
Wilwood introduces these amazing DynaPro4R Drag Race front brake kits. Delivering high torque stopping power with a substantial weight savings over the OE brake components. Dynamic mount steel rotors weigh only 5.7 pounds each. They attach to the OE hubs with lightweight forged aluminum hats using our T-nut mounting system that allows the rotor to move independently of the hat during heat cycles. This eliminates stress at the mount points and the subsequent rotor distortion that can otherwise occur with fixed mount steel plate rotors.
Dynamic mount rotors also assure full release from the pads to run true and drag free down the track. Clamping force is provided by radial mount DynaPro 4R four piston aluminum calipers weighing in at only 4.1 pounds each. DP4R calipers feature stainless steel pistons, internal bore seals, stainless steel bridge wear plates, and allow easy access to the pads for service without removing the calipers from the mount. BP-20 compound SmartPads provide high response and holding power when cold, and resistance to fade when hot. The complete package mounts to the OE spindle with full bolt-on installation.
This kit is configured for drag racing only and is not recommended for street use. A minimum size 17” wheels are required along with a stainless steel braided flexline kit available separately.
- Fits 2015-16 Mustangs
- Black finish
- Sold as kit
More Like This
Wilwood 140-14103 Dynapro Radial Front Drag Brake Kit, Plain
Wilwood 140-14106-D Dynapro Radial Rear Drag Brake Kit, Black
Wilwood 140-15138-D Dynapro Radial-MC4 Parking Brake Kit, Rear, Black
Wilwood 140-15138 Dynapro Radial-MC4 Parking Brake Kit, Rear, Black
Wilwood 140-15138-R Dynapro Radial-MC4 Parking Brake Kit, Rear, Red
Wilwood 140-15138-DR Dynapro Radial-MC4 Parking Brake Kit, Rear, Red
Front Disc Brake Kit GM Metric/Mustang II to 1949-54 Chevy, 5 on 4-1/2
Disc Brake Kit for Total Performance Spindles, 5 x 4-1/2
Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
Q & A
After getting the control arms and drop spindles installed last time, we are dying to see what it looks like on the ground. Today we are working with the Speedway Deluxe Disc Brake Kit. Josh and Joe are on a roll!
Tim talks about the options we have for early Ford drum brakes.
We get a lot of questions about brake kits so Tim gives a brief overview of disc brake setups.
Project Chevelle upgrades the 4 drum brakes single master cylinder that was an unfortunate set of boxes checked on this Chevelle’s order sheet.