|
#910323540
$687.99
/each
In Stock
$696.00
Save $8.01
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Cross Steer Rack Type, 33" Overall Length, 5.50" Travel
| MFG. Part # | 910323540 |
| Brand | Speedway Motors |
| Rack Type | Cross Steer |
| Finish | Polished |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis is a brand new 1935 to 1940 Ford Cross Steer rack and pinion. This Cross Steer rack finally allows you to put rack and pinion steering onto your early Ford straight axle! Smooth, consistent, and easy steering throughout the entire travel.
This rack is designed for an unboxed frame. So, if you do not already have an unboxed frame, you must be willing to unbox a small section.
Also, this rack only works on stock or 2" dropped axles. It will sit too low in the 4" and 6" dropped axles. Finally, if you have a wishbone
suspension, it must be split. A four bar setup will work fine. Additional rack specs: Length: 33" Turns Lock to Lock: 3.6 Travel: 6"
Charts
Specs
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 910323540 |
| Brand | Speedway Motors |
| Rack Type | Cross Steer |
| Finish | Polished |
| Material Type | Aluminum |
| GENERAL | |
| Overall Length | 33" |
| Turns Lock to Lock | 4.6 |
| Travel | 5.50" |
| Spline Count | 26 |
| Sold in Quantity | Each |
7 Questions • 7 Answers
The directions require split wishbones to mount this unit. I have a 1940 Ford with your TH 350 mount kit #916-1940 that also splits the wishbones. Is this "split" large enough to allow the use of of the Unisteer R&P unit # 910323540? Thanks.
by Richard
• 6 years ago
1 answer
View Answer
Can this be modified to work on a 1940 Ford with a 4" dropped axle?
by Dave
• 7 years ago
1 answer
View Answer
I have this unit on my 36 ford pickup. I would like to now have power steering. Is there a power rack that I could replace this unit with and use the existing brackets etc?
by Roger
• 7 years ago
1 answer
View Answer
Could this be made to work on a 1946 ford truck. Or is there a better product?
by Allen
• 8 years ago
1 answer
View Answer
Instructions say to cut existing column 1.5 inches from firewall. My 40 ford is a 3 speed on the column, so it is right where I need to cut. Can this still be installed? Also, do you sell the universal joint, shaft extension, floor mount for the column and material to make the bushing that is required?
by Edward
• 9 years ago
1 answer
View Answer
Would this work on a 1947 Lincoln with a stock axle and wishbone? I assume the Lincoln is pretty much the same as Ford of the same year, but am not certain of that fact.
by BA
• 10 years ago
1 answer
View Answer
how easy does it turn sitting still and how do we know what to order for a 1940 for d5 window coupe with a 2" dropped axle?
by tootie
• 12 years ago
1 answer
View Answer
7 of 7 questions shown
1939-1940 Ford Deluxe
1935 Ford Model 48
1936 Ford Model 68
1937 Ford Model 74
1937 Ford Model 78
1938 Ford Model 81 A
1938 Ford Model 82 A
1935-1940 Ford Sedan Delivery
1939-1940 Ford Standard
