Ultra Lite Brakes 900-1032 Hot Fluid Brake Fluid, 1 Qt.
Hobby Stock, Micro Sprint, Midget, Sprint Car, 1 quarts Liquid Measurement
- Extreme service racing brake fluid has a dry boiling point of over 600-degrees
- Made from a non-silicone base fluid that will not turn black like most competitive brake fluids
- Formulated with special additives that aid in lubricating and gauling
- Guaranteed to be "O" ring friendly
- Sold in convenient 1 quart bottles
Ultra Lite Brakes Hot Fluid is an extreme service racing brake fluid. This high temp brake fluid has a 600 degree plus dry boiling point which makes it ideal for severe braking conditions. Hot Fluid is a non-silicone base fluid that will not turn black like most competitive brake fluids. The fluid also has special additives that aid in lubricating and gauling. Guaranteed "O" ring friendly.
Brake fluid has two seperate ratings, dry and wet boiling points. DOT 3 ratings are 401 degrees dry and 284 degrees wet, while DOT 4 is 446 degrees and 331 degrees respectively. The instant you open a can of brake fluid it starts absorbing moisture from the air, and 3% moisture will take DOT 3 fluid below 284 degrees. DOT 5 fluid is synthetic and gives you a spongy pedal. We don't recommend it! (Use DOT 4)
We have all seen red hot rotors or smelled hot brakes - this tells you that your fluid has boiled and pulled in moisture. Remember that water boils at 212 degrees and when it does, it expands and vapor-locks. This leaves you with no brakes. That's why Indy cars change the brake fluid every time they go on the track.
- Use only the highest rated DOT 4 fluid
- Run a fresh can of fluid through the system a few times a year
- If you open a new can of fluid, use it or throw it away
- Never mix fluid of different ratings
- Get yourself a brake bleeder and use it often
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
More Like This
Ultra Lite Brakes 900-1012 Hot Fluid Brake Fluid, 12 Oz.
Wilwood 290-6209 EXP 600 Plus Racing Brake Fluid, 500 ML Bottle
AFCO 6691903 Ultra HTX 600+ Brake Fluid, 16.9 oz.
AFCO 6691901 High Performance HT Brake Fluid, 12 oz. Bottle
Wilwood 290-0633 570 Brake Fluid, 24/Case of 12 oz Bottles
Wilwood 290-11085 Wilwood 5 Silicone Fluid, 6 Pack 12 oz Bottles
Wilwood 290-2210 570 Brake Fluid, 6 Pack 12 oz Bottles
Wilwood 290-6210 EXP 600 Plus Racing Brake Fluid, Case of 20 Bottles
Redline 90402 RL 600 Brake Fluid
Champion Racing 4057 Heavy Duty Brake Fluid, DOT 3, 12/11 Ounce
Q & A
Check out the 410 sprint car brake installation and bleeding the brakes! We're making serious progress on our build.
Motor oil composition has changed. The reduction of ZDDP, zinc in oil, could now spell disaster for your engine. Watch this video to learn about ZDDP additives.
If you’ve got about 20 minutes free, follow along as Redline Synthetic Oil’s Cameron Evans explains some of the primary differences between the variety of oils and lubricants available in the market today.
Learn a clean and simple process for flushing brake fluid from a micro sprint brake system and why it is important for top performance. Read tips on how to flush the water system, motor oil, fuel, and brake fluid.
Learn the difference between DOT 3 and DOT 4, or DOT 5 and DOT 5.1. Every type of brake fluid has a specific boiling point and water absorbing quality.
A routine weekly maintenance checklist to perform between each race in order to keep a clean and efficient race car at the track.
Sometimes manually bleeding your brakes isn't the best option for you. In this case you can also take a look at our guide on how to gravity bleed the brake system.