Sweet U-Joint, 3/4" Round Weld-on To 3/4 DD
Universal Fit, Single Joint Universal Joint Style, 3/4" DD End #1, 3/4" Round End #2, Steel
- Features needle bearing u-joints
- They have full compliment bearings
- Made of the highest quality for racing
- Features Forged Vanadium steel yokes and u-joint
- There is a 3/4" round on one end and a 3/4" DD on the other
Details
Info
Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.
- Full compliment bearings
- Forged Vanadium steel yokes and u-joint
- Highest quality for racing
- Features needle bearing u-joints
- U-Joint=3.875" L x 1.375" D
Application
When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the u-joint for your specific application.
Notes
Tech Tip #1: When using more than two universal joints in a system, a support heim must be used.
Tech Tip #2: Increasing a U-Joint's angle of operation beyond 30° dramatically increases the stress on the joint, weakening the whole steering mechanism. If a greater angle is needed, add another u-joint.
Important Messages
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Related Products
-
Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole$10.89 -
Firewall Mount Steering Flange Sleeve, 3/4 Inch Shaft$14.06
-
Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack$72.99
-
Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal$82.39
More Like This
-
Unisteer 8050330 Steering U-Joint-3/4 Inch Double D to 3/4 Inch Smooth$72.00
-
Sweet Mfg U-Joint, 9/16 In 26-Spline to 3/4 Round, Mustang II Manual$51.99
-
Sweet U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On$51.99
-
Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB$49.99
-
Sweet Mfg U-Joint, 17mm DD to 3/4 Round, Corvette, Citation Rack$54.99
-
Sweet Mfg. Steering U-Joint, 1 In 48-Spline to 3/4 In Round, GM Column$79.99
-
Sweet Mfg U-Joint, 3/4 In Round to 1 In DD, GM Column/Universal$69.99
-
Sweet Mfg. U-Joint, 3/4 Inch-20 Spline to 3/4 Inch Round, Weld-On$51.99
-
Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline$49.99
-
Sweet Mfg U-Joint, 9/16 26 Spline to 1 In DD, Mustang II Manual$69.99
Reviews
Q & A
-
Our new 383 engine gets installed in the '32 Roadster. We also update the steering wheel, shift knob/adapter, and wheels and tires. It's got some real 1960's flair now!
-
If you're going to buy a horn isn't it nice to know what it sounds like first? That's why Speedway produced a helpful video to hear the differences in the unique horns that we offer.