Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering u-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.
- Full compliment bearings
- Forged Vanadium steel yokes and u-joint
- Highest quality for racing
- Features needle bearing u-joints
- U-Joint=3.875" L x 1.375" D
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
ApplicationWhen purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the u-joint for your specific application.
Tech Tip #1: When using more than two universal joints in a system, a support heim must be used.
Tech Tip #2: Increasing a U-Joint's angle of operation beyond 30° dramatically increases the stress on the joint, weakening the whole steering mechanism. If a greater angle is needed, add another u-joint.
More Like This
Unisteer 8050420 Steering U-Joint, 3/4 Inch Smooth to 3/4 Inch Smooth
Sweet Mfg. Double Steering U-Joint, 3/4 Round to 3/4 Round, Universal
U-Joint, 3/4"-36 Spline To 3/4" Round Weld-on
Sweet Mfg U-Joint, 13/16 36-Spline to 3/4 Round, Big GM Pre 1978
Sweet Mfg U-Joint 3/4 - 30 Spline to 3/4 Round, Small GM P/S 78-Up
Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB
Sweet Mfg. Steering U-Joint, 1 In 48-Spline to 3/4 In Round, GM Column
Sweet Mfg. U-Joint, 3/4 Inch-20 Spline to 3/4 Inch Round, Weld-On
AFCO 30303 U-Joint, 3/4 Inch, Smooth Ends
AFCO 30304 U-Joint, 3/4 Inch-48 Spline
Q & A
Videos & Articles
by SteveWe get a lot of questions about steering parts. Steve talks about some of the steering basics.
Nice graphic courtesy of Bills Hot Rod Company about which of thier Power Steering brackets will work with which water pumps, on both small block and big block Chevy engines.