Part # 910729
Select a vehicle to verify Fitment
Universal Fit, 16.1 SFI Rating, 5-Point Mounting Points
|MFG. Part #||910729|
Need To Know
Free Shipping on Orders Over $149
Quick and Easy Returns
We know racing is your passion, it is ours too. However, we also know all too well that racing is not easy on the wallet. Far too often, by the time the racing budget is used on the major bits like driveline, tires, and so forth, there is not much left in the piggy bank for safety equipment like helmets, fire suits, and racing belts. We believe these items are just as critical to winning a race as having that new race-spec carb or a fresh set of tires, which is why we continually add to our Speedway Motors line of safety gear so that you have a budget-friendly option for staying safe on the track.
Our Speedway Motors Elite Series 5-point harness combo is just what you need for proper retention in your race car. Crafted from premium nylon webbing and double stitched in all critical areas, our racing seat belts are a great value while providing SFI 16.1 certification (dated labels sewn into shoulder, lap, and sub straps) so that you will pass inspection without issue. Built as a pull-down configuration where the strap ends are pulled down, or away, from the adjusters, makes belt adjustment quick and easy for the driver.
The racing harness uses 3-inch-wide lap and shoulder belts while the single anti-submarine strap is 2 inches wide. The shoulder harnesses are a generous 55 inches in length, providing plenty of material to reach your harness crossbar or other approved mounting position. A standard latch-and-link design clasp makes securing harness ends easy while the quick-release pull tab makes belt release a one-handed operation for the driver or emergency personnel.
We made our Elite Series 5-point harness combo easy to install in your race car too. The racing harness can be installed as either a wrap around or bolt-in configuration and we even provide the bolt-in harness tabs with the harness! So now you can easily configure your new Speedway Motors Elite Series 5-point racing harness and install it easily no matter the mounting type at the seat/floor and cage/harness bar locations. The mounting tabs for bolt-in use that are included are 2-inch (instructions are included on how to fold the 3-inch belts for proper mounting). Alternatively, you can convert your 5-point racing harness to a clip-in racing harness using our clip-in harness conversion kit if you prefer quick, easy removal of your racing belts.
Our Elite Series harness is only available in our unique platinum webbing with black latch and adjusting hardware for a high-end professional look while keeping your racing budget in check. A contrasting black pull tab is attached to the latch-and-link clasp. To prevent installation hassle and delays we offer our seat belt installation kit to aid in your 5-point harness install if you are planning a bolt-in installation. Each kit will attach one section of the harness (lap, shoulder, or sub), so order three kits if you are bolting in all five points of your harness. Our optional sternum protector is a highly recommended addition that holds your shoulder harness together in the advent of an impact. These are available in black, red, blue, and purple. We also offer a great value added kit that includes our 5-point racing harness, sternum protector, and harness pads as well.
*SFI implemented a New Label design which removed the punched-out month/year date of manufacture and instead incorporated a single expiration date pre-printed on the label. This system will eliminate the need for punch-dating of labels and aims to facilitate technical inspection of dated products in the field.
Labels will be dated in 6-month segments. These certified items may still be used for 2 years, the service life has not changed.*
|MFG. Part #||910729|
|Harness Component||Complete Harness|
|Harness/Belt Buckle Type||Latch & Link|
|Harness/Belt Mounting Style||Bolt In/Wrap Around|
|Harness/Belt Adjustment||Pull Down|
|Harness Length||55 Inch|
|Lap Belt Width||3 Inch|
|Shoulder Belt Width||3 Inch|
|Submarine Belt Width||2 Inch|
|Sold in Quantity||Set|
|Notes||Comes with 2" end brackets. See installation instructions for adapting 3" belt to 2" bracket.|