Speedway Boost Reference Fuel System Kit with Walbro Pump

This kit includes all of the essentials to run your boost referenced fuel system. Complete with a Walbro pump, Aeromotive regulator, a stainless steel fuel filter, fittings, 20 feet of hose, and installation hardware, your turbocharged monster will get the fuel it needs at a fuel pressure rate that rises on a 1:1 ratio.

Kit includes:

• (1) 910-13129 Aeromotive 13129 EFI Bypass Fuel Pressure Regulator, 30-70 PSI
• (1) 960-392 Walbro GSL392 Inline Racing Fuel Pump
• (1) 960-939 Walbro Inline Fuel Pump Installation Kit with Brackets
• (2) 960-3039 AN 6 Fitting for Walbro GL392 Fuel Pump
• (1) 910-11762 Short Black Fuel Filter Housing w/ Hardware
• (1) 910-11702 OTR 4 Inch Stainless Steel Fuel Filter Element, 140 Microns
• (2) 910-11753-AN6 AN-6 Filter Inlet/Outlet
• (3) 425-785066ERL Earls 785066ERL Vapor Guard 9/16-18 O-Ring Port to 3/8
• (4) 425-750166ERL Earls 750166ERL Vapor Guard Straight Hose End -6 to 3/8 Inch
• (1) 425-750066ERL-20 Earls 750066ERL Vapor Guard EFI 3/8 Inch Hose, 20 Ft.
• (2) 425-75006ERL Earls 75006ERL Vapor Guard Screw Type 3/8 Hose Clamp 5-Pack
• (1) 182-2173 AutoMeter 2173 Auto Gage Mechanical Pressure Gauge, 1-1/2, 0-60

Additional Information:

910-13129 Aeromotive 13129 EFI Bypass Fuel Pressure Regulator, 30-70 PSI

• Base pressure adjustable from 30-70 psi
• Rising rate fuel pressure regulator rises on a 1:1 ratio with boost
• 1/8" NPT gauge port
• Vacuum boost port
• Stainless steel mounting bracket

960-939 Walbro GSL392 Inline Racing Fuel Pump

• Pusher style fuel pump - to be mounted as close to tank as possible
• Must be mounted below fuel tank for proper fuel feed to pump
• Overall Length: 6.44"
• Outside Diameter: 1/70"
• Aluminum material
• Natural finish
• 255 LPH free flow rate
• 60 psi maximum pressure
• 10mm x 1.0 inlet/outlet size
• Lightweight, compact design

960-939 Walbro Inline Fuel Pump Installation Kit with Brackets

• Insulated pump body clamps
• 3/8" hose barb fuel fittings and crush washers
• GSL392 wiring eyelets, nuts, and washers

910-11702 OTR 4 Inch Stainless Steel Fuel Filter Element, 140 Microns

• Safe for use with E85, methanol, race gas, or pump gas

425-750066ERL-20 Earls 750066ERL Vapor Guard EFI 3/8 Inch Hose, 20 Ft.

• 225 psi
• Primary Barrier Layer (innermost) offers high resistance to heat and aggressive fuels
• Three-way shield against hose deterioration
• Vapor Guard Barrier (middle) is a Thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose
• Exterior Cover Barrier (outermost) provides extreme tolerance to heat and ozone

425-75006ERL Earls 75006ERL Vapor Guard Screw Type 3/8 Hose Clamp 5-Pack

• Stainless Steel

182-2173 AutoMeter 2173 Auto Gage Mechanical Pressure Gauge, 1-1/2, 0-60

• 0-60 psi
• 1.5" Direct Mount
• Liquid Filled
• Black w/ Fluorescent Red Needle

Additional Information:

910-13129 Aeromotive 13129 EFI Bypass Fuel Pressure Regulator, 30-70 PSI

• Base pressure adjustable from 30-70 psi
• Rising rate fuel pressure regulator rises on a 1:1 ratio with boost
• 1/8" NPT gauge port
• Vacuum boost port
• Stainless steel mounting bracket

960-939 Walbro GSL392 Inline Racing Fuel Pump

• Pusher style fuel pump - to be mounted as close to tank as possible
• Must be mounted below fuel tank for proper fuel feed to pump
• Overall Length: 6.44"
• Outside Diameter: 1/70"
• Aluminum material
• Natural finish
• 255 LPH free flow rate
• 60 psi maximum pressure
• 10mm x 1.0 inlet/outlet size
• Lightweight, compact design

960-939 Walbro Inline Fuel Pump Installation Kit with Brackets

• Insulated pump body clamps
• 3/8" hose barb fuel fittings and crush washers
• GSL392 wiring eyelets, nuts, and washers

910-11702 OTR 4 Inch Stainless Steel Fuel Filter Element, 140 Microns

• Safe for use with E85, methanol, race gas, or pump gas

425-750066ERL-20 Earls 750066ERL Vapor Guard EFI 3/8 Inch Hose, 20 Ft.

• 225 psi
• Primary Barrier Layer (innermost) offers high resistance to heat and aggressive fuels
• Three-way shield against hose deterioration
• Vapor Guard Barrier (middle) is a Thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose
• Exterior Cover Barrier (outermost) provides extreme tolerance to heat and ozone

425-75006ERL Earls 75006ERL Vapor Guard Screw Type 3/8 Hose Clamp 5-Pack

• Stainless Steel

182-2173 AutoMeter 2173 Auto Gage Mechanical Pressure Gauge, 1-1/2, 0-60

• 0-60 psi
• 1.5" Direct Mount
• Liquid Filled
• Black w/ Fluorescent Red Needle

Fuel Filter Configurations