|
#3003600
$274.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1.25" Overall Height, Aluminum
Need help?
855.313.9176Quick and Easy Returns
Return PolicyGet your wheels lined up correctly with a set of these Speedway Alignment turn plates. At only 5/16 in. thick, you don't need a jack or lift to roll onto these turn plates. They're made from aluminum and are clearly marked at 0, 10, 15, and 20 degrees, with one degree increments in between.
The Speedway alignment turn plates have a smooth handle cut into them for portability, and the bottoms feature a thrust bearing between the plates, so turning the wheels for precise alignment is smooth and accurate.
WARNING:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 3003600 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Length | 18.00" |
| Overall Width | 15.00" |
| Overall Height | 1.25" |
| Load Capacity | 1500 lbs. |
| Material Type | Aluminum |
| Sold in Quantity | Pair |
| Notes | 0-20° range, 1° increments. |
4.7
16 Reviews
The product is praised for its heavy-duty construction, practicality, and easy usability. Users are impressed with the ease of alignment, seeing it as a valuable, time-saving feature. Its lightness and thinness for easy drive-on appeal to customers. Despite some quality issues, users appreciate the product for its convenience of home-garage use, readability, and efficient function. The resonating sentiment is that it's a quality purchase for the money and a great alternative to expensive plates. Multiple users confirmed their willingness to buy again and to recommend it.
4.7
16 reviews
5
14
4
1
3
0
2
0
1
1
Most Liked Positive Review
4.0
Great parts
Great part not packed very well had many scratches on them. They are the largest diameter one's I could find for the money. Have not used yet but should work for me
Most Liked Negative Review
1.0
I would not recommend
Just received my shipment and if not for needing to use soon I would return immediately. They do function however the quality of the finish is poor. These are blemished and scratched. The center bolt is tilted at an angle and the centering hole for the turn lock looks like it has taken some sort of impact.
Filter by Ratings
Quality is very good
5.0
12 days ago
Mooker
Ne
Verified
Excellent product
Would Recommend
I only need one set
5.0
7 months ago
Car restoration person
Mn
Verified
Front end alignment
Would Recommend
glad I bought them
5.0
7 months ago
MB
N.St. Paul
Verified
Alignment is A breeze with these turn plates.
Would Recommend
Great parts
4.0
a year ago
Sprout
Juneau WI
Verified
Great part not packed very well had many scratches on them. They are the largest diameter one's I could find for the money. Have not used yet but should work for me
Would Recommend
Works good
5.0
2 years ago
Doobie
Illinois
Verified
Used them six times in a week. Works very well.
Would Recommend
These are nice, heavy-duty pieces.
5.0
2 years ago
Alignment Time
Denver
Verified
No need for ramps to drive up on these.
Would Recommend
I would not recommend
1.0
4 years ago
Orville
Illinois
Just received my shipment and if not for needing to use soon I would return immediately. They do function however the quality of the finish is poor. These are blemished and scratched. The center bolt is tilted at an angle and the centering hole for the turn lock looks like it has taken some sort of impact.
Would Not Recommend
Nice quality.
5.0
4 years ago
Wilder Motorsports
Sparks, Nv
Verified
These helped me be sure I was getting my set-up right, not just hoping.
Would Recommend
These things are great! Going to save me a lot of time.
5.0
4 years ago
From Buzz's Rod Shop
Prince George, B.C. Canada
Verified
They are easy to read and nice and light
Would Recommend
They do the job
5.0
4 years ago
Tom
Floyd,VA
Verified
Totally worth the money. They're real thin so you can just drive the car on to them. They turn really easy and I aligned everything quick.
Would Recommend
Showing 10 of 16 reviews
2 Questions • 2 Answers
Do these free float an inch or so in all directions, or only rotate about the center axis?
by EP
• 2 years ago
1 answer
View Answer
Hello, is it 1500 lbs per pair or each?
by Wayne
• 2 years ago
1 answer
View Answer
2 of 2 questions shown
