Menu

Shop

Garage

Cart

Account

Part # 91604036

Speedway 1948-60 Ford Pickup Under Box Aluminum Fuel Tank Kit

by

|

  • Compatible with 1948-1960 Ford F1
  • Includes a fuel tank, roll-over vent valve, fuel filler hose, billet aluminum filler neck w/ pop-up gas cap, and a fuel level sender
  • Male AN 6 fitting affixed to a pick-up tube threaded into tank with 3/8" NPT threads

$634.99

kit

In Stock

$667.95

Save $32.96


Quantity

Select a vehicle to verify Fitment

Product Summary

48-60 Ford, Custom Replacement Fuel Tank Style, Natural

  • Compatible with 1948-1960 Ford F1
  • Includes a fuel tank, roll-over vent valve, fuel filler hose, billet aluminum filler neck w/ pop-up gas cap, and a fuel level sender
  • Male AN 6 fitting affixed to a pick-up tube threaded into tank with 3/8" NPT threads
  • Measures 28-1/4" x 16-1/2" x 8"
  • Includes 12" length of fuel resistant 1-1/2" diameter hose and two tube clamps

Comes as a Kit

Key Specs

MFG. Part #91604036
BrandSpeedway Motors
Fuel Tank StyleCustom Replacement
Fuel System TypeCarbureted
Capacity17 gallons

Need To Know

This Product Will Ship Free

Quick and Easy Returns

Details

If you've been wanting to replace your rusty old fuel tank with a shiny new one under the box of your 1948-1960 Ford F1, then look no further! This kit features everything you will need to mount a brand new fuel tank under your pick-up bed and comes with a fuel tank, roll-over vent valve, fuel filler hose, billet aluminum filler neck w/ pop-up gas cap, and a fuel level sender.

This kit includes:

  • 910-76048 1948-60 Ford Pickup Under Box Aluminum Fuel Tank
    • 17 gallon aluminum fuel tank
    • Designed to be mounted under the 1948-60 Ford F1 Pick-Up box
    • DOES NOT accept original truck fuel sending unit
    • DOES accept common aftermarket gauge sending units (included in kit)
    • Measures 28-1/4" x 16-1/2" x 8"
    • 1/4" female NPT thread for vent hose/fitting (works perfectly with included 458-400)
    • Male AN#6 fitting affixed to a pick-up tube threaded into tank with 3/8" NPT threads
    • Sender has 10/24th thread count
  • 458-400 Speedway Fuel Tank Roll-Over Vent Valve
    • Automatically stops fuel flow if your car somehow gets upside down
    • Inside is a needle/ball seat which stops fuel flow out the vent (if you get upside down)
    • Accepts 5/16" hose
    • Fits into 1/4" NPT port
    • Measures 3" bottom-to-top
  • 617-9060-12 Fuel Filler Hose Kit, 1-1/2" I.D., 12 Inch
    • Includes 12" length of fuel resistant 1-1/2" diameter hose and two tube clamps
  • 910-12521 Speedway Billet Aluminum Fuel Filler Neck w/ Pop-Up Gas Cap
    • Polished billet aluminum pop-up flush mount gas cap
    • Measures 2-1/2" O.D. and 1.600" tall
    • Works with 1-1/2" hose
    • Does not have a vent hole. Some air might get past the threads that hold the cap on, but there is no dedicated venting passage
  • 910-65082 Speedway Fuel Level Sender, 240-33 Ohm, 6-24 Inch
    • Works in tanks from 6" to 24" deep
    • Can be used as RH or LH swing with minor adjustment
    • Comes with seal and all mounting hardware
    • 240 ohms empty, 33 ohms full
    • 2-3/4" flange OD
    • Overall Length: 15.50"

Charts

Specifications

KEY SPECS
MFG. Part #91604036
BrandSpeedway Motors
Fuel Tank StyleCustom Replacement
Fuel System TypeCarbureted
Capacity17 gallons
GENERAL
Fuel Capacity Range15.00-19.99 Gallons
Material TypeAluminum
FinishNatural
ColorNatural
Sending Unit IncludedYes
Ohm Range240-33
Fuel Pump IncludedNo
Filler Neck IncludedYes
Tank Straps IncludedNo
Hardware IncludedYes
Overall Length28.25"
Overall Width16.50"
Overall Height8.00"
Outlet Fitting3/8 NPT to AN6
Sold in QuantityKit