|
#91657008
$846.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
33-34 Ford, Steel, Natural, 11 Gauge Thickness
Truck Shipment
Truck shipments must be pre-paid with a credit card, certified check or money order
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway's 1933-1934 Ford reproduction frame rails are the perfect foundation for your Hi-Boy style project. These one-piece, 11-gauge steel stampings are made to original specifications and show a fine attention to detail.
Welding and fabrication skills required.
Charts
916-57008 Instructions (PDF)
Guides & Documents
WARNING:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91657008 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Gauge Thickness | 11 |
| Sold in Quantity | Pair |
4
5 Reviews
Customers praised the product for its high quality and practicality, especially in building and replacing parts for vintage cars like Ford roadsters or pickups. The product was effective in saving time on welding tasks and massively reduced rust issues. Customers found the frame rails an excellent beginning point for personal projects. However, some customers noted inaccuracies in the description, encountering issues with hole alignment and necessitating additional alternations. Despite this, customers successfully utilized the item even in challenging conditions. The product stands out for its adaptability to modification and overall utility in restorative projects.
4
5 reviews
5
3
4
0
3
1
2
1
1
0
Filter by Ratings
Yes
5.0
a year ago
Wen
Martinsville Ind.
All good
Would Recommend
I would buy again
3.0
4 years ago
Mrbill
Conn
Verified
Build a 33 ford roadster
Would Recommend
1933/34 frame rails nice and they are a direct replacement!
5.0
5 years ago
coupe33
Southern Maine
Verified
I was replacing the stock frame rails that were just full of rust and holes. Some of the top rails were missing and these rails saved me a lot of welding.
Would Recommend
Description is not accurate
2.0
5 years ago
Tyler
Missouri
It says all the original holes are drilled and all original parts will fit. This is not true at all. I bought these because I needed to build a new frame for my 34' ford pickup because the passenger side had been repaired incorrectly years ago and both had rust damage. Only two of the cab mounts lined up, two of the front fenders lined up and only one hole for the running board lined up. Lucky it was enough to locate the other holes and drill them out. The steering box holes were nonexistent. There are so many holes in them that I have no idea what they would go to. Also the shape of them is a little different from what my original ones look like. I found a print of the frame with dimensions on it so I just measured off of it to make sure everything was where it needed to be. All in all I'm not too happy with them but I made them work because I couldn't find anything else near me. If you decide to buy this product and also purchase the matching boxing plates be prepared to pie cut them. The shape of these frame rails and the boxing plates is not the same at all. If you need to build a frame these will work just fine, but be prepared to do a lot more work than what you should.
Would Recommend
Nice product. Perfect for my project.
5.0
10 years ago
RB
Myrtle Beach, SC
Verified
If you want to do your own thing and modify the typical hot rod frame/suspension setup, then you are better off with these frame rails. It is a great beginning point. A good plan for the standard 33-34 chassis frame would have been very helpful and should be included in this sale.
Would Recommend
Showing 5 of 5 reviews
3 Questions • 3 Answers
does your blue print show what the holes are for and what size nuts to weld on the back side before boxing or do you have a chassis hole call out sheet thank you
by clyde 28075
• 11 years ago
1 answer
View Answer
Hello will this frame work for the 1933 Ford Pickup?
by Waterguy_CC
• 11 years ago
1 answer
View Answer
do you sell all the rest of the parts to complete the frame so all you have to do is bolt on body and suspension parts
by
• 15 years ago
1 answer
View Answer
3 of 3 questions shown
1933 Ford 1 Ton Pickup
1933 Ford 1/2 Ton Pickup
1933 Ford 3/4 Ton Pickup
1933-1934 Ford Model 40
1934 Ford Model 40 A
1933 Ford Model 46
1933 Ford Model BB
1933-1934 Ford Sedan Delivery
