Small Block Chevy Oval Track Solid Lifter Cam, 4200-7600 RPM

#91512005

Small Block Chevy Oval Track Solid Lifter Cam, 4200-7600 RPM

1 Question

Solid flat tappet camshaft
Designed for dirt late models

$131.99

On Backorder

This part is Backordered. We estimate this item will ship on or before September 1st.

Garage Sale alternatives: from $114.99

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Chevy Small Block V8, Solid Flat Tappet Camshaft Type

Solid flat tappet camshaft
Designed for dirt late models

See more details

Key Specs

Camshaft Type	Solid Flat Tappet
RPM Range	4200-7600
Intake Duration (.050" Lift)	260
Exhaust Duration (.050" Lift)	270
Lobe Separation	106 °

See more specs

Need To Know

Free Shipping on Orders Over $149

Need help?

Quick and Easy Returns

Speedway Motors 91512005 Details

Our solid flat tappet cams offer superior performance and the very best value. These grinds are tried and tested!

Note: This cam is not drilled for an accessory drive. Many sprint cars use a fuel pump, power steering, or dry sump oil pump mounted to the rear of the engine which is driven off of the back of the camshaft. This requires that the cam be drilled and tapped for the drive spud. Our flat tappet cams DO NOT have this modification. (Our roller cams already have this modification incorporated when manufactured.)

If you are running a sprint or modified that uses a rear cam accessory drive and your local rules dictate that you run a flat tappet cam, you will have to take the cam to a competent machinist and have it drilled and tapped for the drive spud.

Item Details

Mechanical - dirt late model - 3/8-1/2 Mile tracks, best w/good heads, carb and intake. Not recommended for cast piston claimer motors.

Charts

915-12005 Instructions (PDF)

Cam Card - 91512005 (PDF)

Cam Application Chart (JPG)

Specs

Hot Valve Lash Settings:

0.026" Intake
0.028" Exhaust

Guides & Documents

Camshafts Instruction Sheet (91512005)

Camshafts Guide/Document (91512005)

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA Prop 65

CARB warning

Speedway Motors 91512005 Specifications

KEY SPECS
MFG. Part #	91512005
Brand	Speedway Motors
Camshaft Type	Solid Flat Tappet
RPM Range	4200-7600
Intake Duration (.050" Lift)	260
Exhaust Duration (.050" Lift)	270
Lobe Separation	106 °

GENERAL
Speedway Motors Catalog Part #	915-12005
Intake Duration	301
Exhaust Duration	308
Sold in Quantity	Each