Small Block Chevy Oval Track Solid Lifter Cam, 3300-7000 RPM

#91514102

Small Block Chevy Oval Track Solid Lifter Cam, 3300-7000 RPM

2 Questions

Our solid flat tappet cams offer superior performance and the very best value
These grinds are tried and tested!
0.026" Intake

$138.99

In Stock

$147.00

Save $8.01

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Chevy Small Block V8, Solid Flat Tappet Camshaft Type

Our solid flat tappet cams offer superior performance and the very best value
These grinds are tried and tested!
0.026" Intake
0.028" Exhaust

See more details

Key Specs

Camshaft Type	Solid Flat Tappet
RPM Range	3300-7000
Intake Duration (.050" Lift)	251
Exhaust Duration (.050" Lift)	260
Lobe Separation	106 °

See more specs

Need To Know

Free Shipping on Orders Over $149

Need help?

Quick and Easy Returns

Speedway Motors 91514102 Details

Our solid flat tappet cams offer superior performance and the very best value. These grinds are tried and tested!

Note: This cam is not drilled for an accessory drive. Many sprint cars use a fuel pump, power steering, or dry sump oil pump mounted to the rear of the engine which is driven off of the back of the camshaft. This requires that the cam be drilled and tapped for the drive spud. Our flat tappet cams DO NOT have this modification. (Our roller cams already have this modification incorporated when manufactured.)

If you are running a sprint or modified that uses a rear cam accessory drive and your local rules dictate that you run a flat tappet cam, you will have to take the cam to a competent machinist and have it drilled and tapped for the drive spud.

Item Details

Mechanical - IMCA Modified - 1/4-3/8 mile track, good for tight corners.

Charts

915-14102 Instructions (PDF)

Cam Card - 91514102 (PDF)

Cam Application Chart (JPG)

Specs

Hot Valve Lash Settings:

0.026" Intake
0.028" Exhaust

Guides & Documents

Camshafts Instruction Sheet (91514102)

Camshafts Guide/Document (91514102)

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA Prop 65

CARB warning

Speedway Motors 91514102 Specifications

KEY SPECS
MFG. Part #	91514102
Brand	Speedway Motors
Camshaft Type	Solid Flat Tappet
RPM Range	3300-7000
Intake Duration (.050" Lift)	251
Exhaust Duration (.050" Lift)	260
Lobe Separation	106 °

GENERAL
Intake Duration	284
Exhaust Duration	292
Sold in Quantity	Each