-13%

-13%

#UP233325

7"SINGLE DIAPHRAM BOOSTER

Blemished
Item has cosmetic imperfections such as scuffs, dents, bends, or similar marks. The item functions as originally intended but is discounted due to these blemishes. Please review the photos and description for more information
Compact for installation under floor or on firewall of almost any vehicle

$135.99

/each

In Stock

$156.99

Save $21.00

Order soon, only 1 left in stock!

Item has cosmetic imperfections such as scuffs, dents, bends, or similar marks. The item functions as originally intended but is discounted due to these blemishes. Please review the photos and description for more information.

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

3.70" Overall Thickness, 7" Outside Diameter, Steel

Blemished
Item has cosmetic imperfections such as scuffs, dents, bends, or similar marks. The item functions as originally intended but is discounted due to these blemishes. Please review the photos and description for more information
Compact for installation under floor or on firewall of almost any vehicle
Single diaphragm booster measures 7" in diameter and fits in the tightest spaces possible
Booster has four bolts on 3 3/8" centers which fits a variety of mounting brackets and pedal assemblies
The length 4 bolt mounting face to master cylinder mount face is 3-5/8"
Zinc plated for corrosion resistance

See more details

Key Specs

MFG. Part #	UP233325
Garage Sale Type	Blemished
Outside Diameter	7"
Material Type	Steel
Finish	Zinc Plated

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Ineligible for Return

Contains items that cannot be returned

Installation Details

Installation Tips

How to test your brake booster vacuum:

The valve where the vacuum line plugs in is a one way valve and is the first thing to check. Next with the car not running pump the brakes several times to remove any residual vacuum in the booster. Now push the brake pedal firmly down and hold pressure on the pedal, start the engine and when the vacuum reaches the booster the pedal should go down slightly. If it doesn’t move at all or if it goes down over an inch or more there is probable cause for concern. Next install a vacuum gauge in the line at the booster, start the engine and check the available vacuum. For full assist you need 18-20” of vacuum available.

This booster accepts master cylinders designed for a boosted brake system that have 3-3/8” center to center mount pattern. Depending on the application Speedway offers 1” bore GM style master cylinders for the front disc and rear drum vehicles under part number 91031445 or for the four wheel disc applications we offer a 1-1/8” bore master cylinder under part number 91031440. We also carry several other options in chrome, polished aluminum, and performance versions from CPP.

Installation Note: Before installing the master cylinder onto the booster, you may need to make an adjustment. The pushrod on the brake booster should protrude 1/16" from the face of the booster to insure proper engagement with the master cylinder.

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)

Speedway Motors UP233325 Details

Garage Sale Product

This is Garage Sale priced due to cosmetic imperfections. The item functions as originally intended but is discounted due to the blemishes. The photos above will show the imperfections. THERE ARE SCRATCHES AND SOME MINOR CHIPS ON THE TOP AND SIDES OF THIS PART.

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Single diaphragm boosters are compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Zinc chromate finish. The single diaphragm is usually used on lighter vehicles. In the heavier applications of 3000-3500 pounds or more we normally use the dual diaphragm boosters.

You will need full manifold vacuum available to the booster. Manufacturer requirements vary between 18 and 20 inches of vacuum. With radical cams there are many cases where there is a loss of the necessary vacuum and the only option is a 12 volt vacuum pump available from Speedway under part number 91028146.

O.D. is 7" Length from mount surface to master cylinder mount surface is 3-5/8" (this does not include the shoulder that extends into the master cylinder)
3/8 x 24 thread pushrod that is 4" long from mount surface to end of the threads (pushrod nut included)
4 bolt mount pattern on 3-3/8" centers
Mount bolts are 5/16 x 20 and 7/8" long and nuts are included
Master cylinder mount studs are 3/8 x 18 and 1-1/16" long and 3-3/8" on center

Learn more about selecting the proper brake booster for your vehicle by reading our tech article.Brake System Selection.

Charts

Booster Tech Tip (GIF)

CA Prop 65

Speedway Motors UP233325 Specifications

KEY SPECS
MFG. Part #	UP233325
Brand	Speedway Motors
Garage Sale Type	Blemished
Outside Diameter	7"
Material Type	Steel
Finish	Zinc Plated

GENERAL
Overall Thickness	3.70"
Bolt Hole Pattern	3.38" x 3.38"
Centerline of Holes	3.38"
Brake Booster Type	Vacuum Diaphragm Single
Sold in Quantity	Each
Notes	Length from mount face to M.C. mount face is 3-5/8". Pushrod extends 4" from mount face and has 3/8"-24 threads. Mount bolts are 5/16"-20 x 7/8". M.C. mount studs are 3/8"-18 x 1-1/16".

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.