Simpson 51201 Latch n Link Safety Belt w/Steel Adjusters, RH Ratchet
Universal Fit, 16.1 SFI Rating, Complete Harness Harness Component, 5-Point Mounting Points
These ratchet belts are available in right side, with steel adjusters. Simpson's 5-point Sprint car latch and link ratchet restraint systems are SFI 16.1 certified and as always, made in the U.S.A.!
- SFI 16.1 Certified
- 5-Point Latch & Link
- 2" over shoulders belt width
- Steel Adjusters
- Platinum Series
- Fixed Left Side
- Right Side Ratchet (ratchet tool is included)
Speedy Tip: Seat belts lose around 50% of their strength over a two year period due to the dirt, washing, and sunshine. As a rule, seat belts should be replaced every two years. Belts that have been through an accident should also be replaced due to the forces exerted on them.
SFI Transitioning to New Labels for Driver Restraints and Window Nets/Roll Cage Nets for 2017
In 2017, SFI Foundation, Inc. (SFI) changed the way its labels for Driver Restraints, Window Nets, and Roll Cage Nets are dated.
SFI implemented a New Label design which removed the punched-out month/year date of manufacture and instead incorporated a single expiration date pre-printed on the label. This system will eliminate the need for punch-dating of labels and aims to facilitate technical inspection of dated products in the field.
New Labels started to be used after January 1, 2017. An example of the new label (right), next to the old label (left) for comparison, is shown above.
The new labels are used for the following SFI products:
• Driver Restraints: SFI Specs 16.1, 16.2, 16.5, and 16.6
• Window Nets: SFI Spec 27.1
• Roll Cage Nets: SFI Spec 37.1
Labels will come out in 6-month segments per the chart shown above. These certified items may still be used for 2 years, the service life has not changed.
Be aware that product manufacturers are allowed to use the discontinued punch-date style labels (above left) until their existing supply runs out. Therefore, you may see the old-style labels on Driver Restraints and Window Nets/Roll Cage Nets for a while. Restraints or Nets with the old label may also still be used until they expire, which is 2 years from the date of manufacture punched on the tag.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
Simpson 51202 Latch n Link Safety Belt w/Alum Adjusters, RH Ratchet
Hooker Harness 5 Point Latch And Link Safety Belt, 2 Inch Shoulder Set
Impact Racing 5-Point Ratchet Seat Belt Set, 2" Shoulder Strap
Simpson 51204 Latch n Link Safety Belt w/Alum Adjusters, LH Ratchet
Simpson 51203 Latch n Link Safety Belt w/Steel Adjusters, LH Ratchet
Simpson 5-Point Harness Seat Belt Sets, Clip-In, Pull Up
Simpson 5-Point Harness Seat Belt Sets, Clip-In, Pull Down
Simpson 5-Point Harness Seat Belt Sets, Wrap Around, Pull Down
Simpson 29072 5-Point Racing Seat Belt Harness, 62 Inch, Wrap-Around
Simpson Pull Down Roll Bar V Racing Harness
Q & A
Jason Martin is in the pits at 305 Racesaver Nationals talking to racers about topics they would like more information on. Watch this video to learn how to install a fire suppression system to help keep you safe!
EMi Employee Frank and Speedway Motors employee Jeremy demonstrate how to properly measure for a race suit.
Having a difficult time deciding which racing harness to use? With many options to consider from size to closure type, this article will walk you through how to go about choosing the perfect one for you and your race car. Safety first!
Need a little help figuring out which race harness will suit you best? Click here for some things to keep in mind!
Dalton discusses a few great safety features that we offer for our customers here at Speedway Motors . We have what you need to remain safe in your race car.
Learn the difference between a pull down or pull up style harness and if a bolt-in or wrap around style seat belt will be best set up for your race car.
Learn how to choose a head and neck restraint system for competitive motorsports. To prevent injury, racing safety gear must meet the SFI 38.1 specification test and fit properly.