Ram Clutches 98931HD HD Clutch, GM 11 Inch X 1-1/8-10 Spline
10 Spline Count, 1.125" Shaft Diameter, 11" Diameter, Metallic Friction Material
STREET AND COMPETITION PERFORMANCE TO 650 HORSEPOWER
?POWERGRIP HD is a true “strip/street” competition clutch system that can handle the rigors of weekend racing and spirited street driving. This system has the same components as standard POWERGRIP above with the exception that the disc friction surfaces are both sintered metallic. Sintered metallic provides a degree of slippage on vehicle launch to prevent the violent and uncontrollable engagement characteristics of paddle type metallic discs. This firm consistent engagement is easy to control. Some chatter is likely on engagement with rear gearing less than 3.73 in street applications. Each set includes the pressure plate, clutch disc, release bearing, and alignment tool unless otherwise noted. Use Powergrip HD for power levels to 650 horsepower, or lower powered vehicles that see frequent track duty.
- 11 x 1 1/8-26 spline GM
- 8 spring hub
- For applications up to 650 hp
- Includes pressure plate, clutch disc, release bearing
ApplicationGM 11 X 1-1/8-10
Instruction Sheet (PDF)
- This item ships directly from the manufacturer. It may take an additional 2 business days for Ram Clutches to ship this item.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
More Like This
Ram Clutches 98762HD Powergrip Clutch, GM 11 Inch X 1-1/8-10
Ram Clutches 98760HD Powergrip Clutch, GM 10.5 Inch X 1-1/8-10
Ram Clutches 88762HDX HDX Clutch, GM 11 Inch X 1-1/8-10 Spline
Ram 98762 Powergrip Series Clutch, GM Diaphragm, 11 x 1-1/8-10
Ram Clutches 88762 Clutch, GM 11 Inch X 1-1/8-10 Spline
Ram Clutches 98764HD Powergrip Clutch, GM 11 Inch X 1-1/8-26
Ram Clutches 88793 Clutch, GM Truck 12 Inch X 1-1/8-10 Spline
Ram Clutches 98935HD HD Clutch, GM 12 Inch X 1-1/8-26 Spline
Ram Clutches 98516 Powergrip Clutch, GM 11 Inch X 1-1/8-26 Spline
Ram Clutches 98730HD Powergrip Clutch, GM 10.5 Inch X 1-1/8-26
Q & A
Finally, Project Chevelle gets a real hot rod engine under its hood! And what about that flimsy old column shift three-speed? We've got that covered too.
Pat talks about our LS flexplate options.
Tim talks about why using a new pedal assembly may be better for your project than the original pedal assembly.
Brinn Clutch Rebuild Instructions
Check out a couple of tips on how to install a new clutch.
There are a few things to consider before you select a replacement flexplate for your small-block Chevy engine. Speedway has some useful tips to follow that will help speed up the process.
One of the most challenging things about swapping transmissions can be figuring out the clutch linkage. Speedway can show you how to install the upgraded hydraulic throwout bearing with ease.