Radiator Accessory Kit
Universal Fit, 2.00" Overall Height, 4.47" Overall Length, 1/8" NPT Thread Pitch, Natural
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Build Your KitYou're almost there! This kit has an option or two for you to select. Let us know which options you want for your new kit.
- (1) Speedway Inline Die Cast Filler Neck
- (1) Stant High Pressure Racing Radiator Cap
- (1) Speedway Radiator Overflow Kit
- (2) COMP Cams Gator Brand Hose Clamp
Speedway Inline Die Cast Filler Neck
This 1-1/2" inline hose adapter allows you to put a radiator fill cap inline.
- Overall Height: 2.00"
- Overall Length: 4.47"
- Inside Diameter: 1.18"
- Outside Diameter: 1.50"
- Thread Pitch: 1/8" NPT
- Material Type: Aluminum
- Finish: Natural
Stant High Pressure Racing Radiator Cap
Stant racing radiator caps are used by all the top NASCAR teams. They are best high pressure radiator caps you can buy! The Stant 10372 has a 21-25 psi pressure rating and is designed for open systems on racing vehicles.
- Overall Height: 2.625"
- Overall Length: 3.14"
- Overall Diameter: 2.625"
- Pressure Rating: 21-25 lbs
- Material Type: Steel
- Finish: Zinc Plated
Learn more about how to choose the proper pressure radiator cap and how they work by reading our tech article, Cooling System Principles.
Speedway Radiator Overflow Kit
- Aluminum 1/8" NPT to 1/4" barb fitting
- 1/4" plastic tubing
COMP Cams Gator Brand Hose Clamp
Gator Brand Performance Hose Clamps, Size Range: 1.250"-2.000" OR 35mm-50mm. Gator Brand Clamps are produced using a stainless steel continuous band with extruded, asymmetrical threads for reliable performance. The edges of the band are rolled to prevent any sharp edges from damaging the hose. This is especially important on silicone hoses that have a soft, vulnerable cover.
- Constructed of continuous stainless steel band with extruded, asymmetrical threads
- Asymmetrical (offset) gear box employed to reduce clamp twist when tightening
- Combination of asymmetrical gear box and extruded threads provides even clamping force over surface of hose
- Hold up under 3.7 ft./lbs. (5nm) torque
- Cover size range of 5/16" (8mm) to 5.000" (120mm)
- MFG. Part #: G31232
- Hose OD: 1.25"
- Material Type: Stainless Steel
- Finish: Natural
- Minimum Clamping Diameter: 1.25"
- Maximum Clamping Diameter: 2"
- Style: Worm Gear
- Grip Range: 1-1/4" to 2"
What's In The Kit
Inline Die Cast Filler Neck, 1.5 Inch HosePart # 5752202Qty x 1
Stant 10372 High Pressure Racing Radiator Cap, 21-25 LbsPart # 91015706Qty x 1
Radiator Overflow KitPart # 9403400Qty x 1
COMP Cams G31232 Gator Brand Hose Clamp, 1.250 - 2 in. Range, Size 24Part # 282G31232Qty x 2
More Like This
Inline Fabricated Filler Neck, 1 1/2 Inch Hose
Speedway Weld-On Billet Aluminum Radiator Filler Neck
Inline Die Cast Filler Neck, 1.5 Inch Hose
Model T Filler Neck, Chrome
Aluminum Radiator Weld-On Inlet/Outlet Neck Kit w/ Petcock
Model T Filler Neck, Brass
AFCO 80154BK Billet Radiator Filler Neck
Earls 166014ERL Radiator Filler Necks, 32mm Opening
Earls 166015ERL Radiator Filler Necks, 1.5 Inch Opening
Q & A
Tim talks about a few aluminum radiators we have to offer.
Speedway Motors employee Pat joins us once again. This time Pat is talking to the Model A and Model T owners, specifically in regards to Moto-Meters and accessories.
Speedway Motors and Classic Trucks used an AFCO radiator in the ground-up rebuild of the Speedway Motors 1952 Chevy truck.
Are you ready to replace that old radiator? Whether it's a factory or high performance application, we can help you choose the correct radiator with a matching fan shroud for your street rod.
We all need a little help from time to time. In this case, we had a grill shell on a 1946 Chevrolet Truck that could use some stiffening. Ride along as Heath installs support rods and rod brackets.
Shortcuts don't always pay off. Zach Raddatz walk us through his experience with a cheap radiator so we don't make the same mistake!
Tim talks about the process of adapting a full size 1932 Ford Radiator to fit in his 1929 Ford Roadster project.