QA1 52437 Pro Touring Street Control Arm, GM A-Body

QA1's Street Control Arms use a factory replacement ball joint and polyurethane pivot bushings. These work great on vehicles used primarily for cruising and long distance events. Configured for QA1 Pro Coil Systems, these street control arms feature powder coated tubular construction for increased strength and great looks. A bolt-in spring adapter is available separately to allow the control arms to be used with stock springs. All of the upper arms feature an offset cross shaft letting you quickly and easily adjust camber.

All of these arms are designed to add 3-4 degrees of caster and 0.5 to 1 degree of negative camber when used together. When used independently they will add approximately half of the preceding numbers.

QA1's GM A, G and F-Body and S Series truck control arms are also offered in race configurations for added performance. Bolt-In Spring Adapters for Stock Springs A bolt-in spring adapter is available separately to allow the control arms to be used with stock springs.

BUICK
Gran Sport 1965 - 1967
GS 1970 - 1972
GS 350 1968 - 1969
GS 400 1968 - 1969
GS 455 1970 - 1972
Skylark 1964 - 1972
Special 1964 - 1969
CHEVY
Chevelle 1964 - 1972
El Camino 1964 - 1972
Malibu 1964 - 1967
Monte Carlo 1970 - 1972
GMC
Sprint 1971 - 1972
OLDSMOBILE
442 1964 - 1971
Cutlass 1964 - 1972
F85 1964 - 1972
Vista Cruiser 1964 - 1972
PONTIAC
GTO 1964 - 1972
LeMans 1964 - 1972
Tempest 1964 - 1970

Installation Instructions (PDF)