Longacre 44930 Heavy Duty Racing Wiring Harness
- Plugs into all Longacre switch panels
- Color coded wires match Longacre dash panels
- Includes Firebraid™ sleeve for heat protection
- Saves time, hassle and confusion
- 16 gauge wire
- Harness length: 81"
- Firebraid™ Length: 8"
This harness connects Longacre switch panels to your car. If you have just purchased a switch panel, discard the half of the connector with 3 unconnected wires.
Brown wire - to battery or power source (you can pick up power at the starter motor.) The larger ring terminal goes to the battery cable terminal.
Two Yellow wires - one wire to ignition system; one wire to any accessory you want to shut off with the ignition – gauge and warning lights, tach, etc.
(NOTE: Both yellow wires are connected to the same source. Two separate wires are provided for your convenience.)
Green wire - to starter motor or solenoid. The smaller ring terminal goes to the solenoid.
Use a grommet where the wire goes through the firewall or any other sheet metal. If the headers are very close to the starter motor (& this harness) you may need additional heat insulation. See Longacre catalog or website www.LongacreRacing.com for FirebraidTM.