KRC Power Steering 25305000 Pump Flow Control Valve, 1.43 GPM, ID:5
Dirt Late Model, Modified, Pavement Late Model, Stock Car
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist.
Note: KRC Flow Valve fittings allow for flow from 1.18 GPM to 2.92 GPM. The 1.18 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 2.92 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.
Item Details-6 male, 1.32 GPM, ID:5
- Larger flow valves are required when using steering quickners or 3.4 inch per revolution or faster rack-and-pinions. If you run on smaller tracks, a larger flow valve can give you more assist through the tight corners. Cars with wide tires and a lot of positive caster may also require more fluid flow. If you drive into the corner and feel as though the steering has a slight catch to it, commonly called "pump catch", a larger flow valve may be required.
- Smaller flow valves can be used on tracks with long straightaways or long sweeping corners. By decreasing the flow you can gain more feel and stability in the steering system. Also those running Mustang style racks, you may require a smaller flow valve. The most commonly used is ID:6.
- When selecting a flow valve for a race track only car, the driver should use the valve the feels the best at race speeds. On street driven cars, you must consider finding a happy medium between the ease of parking and highway stability.
More Like This
KRC Power Steering 25304000 Pump Flow Control Valve, 1.18 GPM, ID:4
KRC Power Steering 25306000 Pump Flow Control Valve, 1.70 GPM, ID:6
KRC Power Steering 25307000 Pump Flow Control Valve, 1.96 GPM, ID:7
KRC Power Steering 25309000 Pump Flow Control Valve, 2.41 GPM, ID:B
KRC Power Steering 253011000 Pump Flow Control Valve, 2.75 GPM, ID:D
KRC Power Steering 253010000 Pump Flow Control Valve, 2.65 GPM, ID:C
KRC 25308000 Pump Flow Control Valve, 2.22 GPM, ID: None, Base Flow
Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
Bills Hot Rod Co. 1001 Power Steering Flow Control Valve Kit
KRC Power Steering 25305000 Pump Flow Control Valve, 1.43 GPM, ID
Q & A
Learn about Mustang II Power steering and the components that are necessary for success.
Today we are installing original style pump, pulleys, brackets, and hoses! Watch as Joe and Zach improve the ratio and make driving the Chevelle easier.