K&N 85-1060 Carburetor Hat Air Plenum Carb Bonnet, 5-1/8 Inch
Universal Fit, Aluminum, Powder Coated, 4" Tube O.D., Single Inlet Quantity
- This item ships directly from the manufacturer. It may take an additional 2 business days for K&N Filters to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
K&N Plenums and adapters for the Weber DGV carburetor allow for smooth airflow into your engine.
Cast aluminum plenum, beautifully finished with black powder coating and natural aluminum highlights. The plenum is designed to fit most American 4 barrel carb that have a 5-1/8" flange. Also will fit the Weber DGV carburetor when used with K&N adapter 85-1061. Designed for cold air intake, plenum has a single snorkel outlet that can be fitted with a 4" I.D. hose running to a remote air filter. A K&N universal filter with a 4" flange can also be clamped directly on the snorkel as well. See the Universal pages for filters that will fit onto the inlet. The outside diameter of the plenum is 9" and the snorkel sticks out 6" from the center of the plenum. Minimum clearance required above the carburetor flange is 3-1/8". Customer must provide 1/4"-20 hold down stud.
The custom plenum is recommended for small displacement engines (less than 200 C.I.) or low revving V6-V8 engines. If the engine requires more than 45 sq. in. of filter area then the plenum should not be used because the carburetor would have to be re-jetted and a loss of high R.P.M. power will be the result.
- Fits most American 4 barrel carburetors with a 5-1/8 In. flange
- Fits Weber DGV carburetor when used with adapter 85-1061
- Adapts carburetor to 4 In. hose or K&N universal air filter
- Cast aluminum with black powder coating and natural aluminum highlights
Outside Diameter 9"
K&N Warranty Info (PDF)
More Like This
K&N 85-8921 Weber DGV Carb Hat Mini Air Plenum, Single 2.5 Inlet
K&N 85-8927 Weber DGV Carb Hat Mini Air Plenum, Dual 2.5 Inlet
Offenhauser 2748 Aluminum Carb Hat Air Plenum Carburetor Bonnet
Spectre 98499 Carb Hat Air Bonnet Plenum, Low Profile, Single
Spectre 9804 Carb Hat Air Intake Plenum, Ultra Low Profile, Dual
Spectre 9849 Carb Hat Air Bonnet Plenum, Single, 4 Inch
Spectre 9854 Carb Hat Air Intake Plenum, Ultra Low Profile, Dual
Spectre 98261 LSx 90 Degree Over-the-Top Air Intake Plenum
Spectre 98281 Carb Hat Air Intake Plenum, Low Profile, 4 Inch
Spectre 98291 Carb Hat Air Intake Plenum, Low Profile, 4 Inch
Q & A
In this episode, Project Chevelle takes a big step in its muscle car transformation. It's out with the little old 307 and to the dyno with our new 383 from BluePrint Engines!
Pat talks about one of our cold air intake kits from AIRAID.
Tim shows off the two Cadillac style air cleaners we have to offer.
Now that Project Chevelle is making some real power, we've decided to ditch the old tank, lines, and pump in favor of a new tank and pump from Tanks Inc.
Do you have carbs sitting on the shelf waiting to be put on? Heath talks about the preparation and parts needed to install a set of Super 9-7 Carbs on his 1949 Flathead 8BA V8 Model A.
A routine weekly maintenance checklist to perform between each race in order to keep a clean and efficient race car at the track.
Now that Project Chevelle is making some real power, it's time to give it a little more fuel. Follow along as we install a new tank and pump from Tanks Inc.