|
#91717627
$40.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1.50" Outside Diameter, Aluminum
| MFG. Part # | 91717627 |
| Brand | Speedway Motors |
| Thread Pitch | 3/8" NPT |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpecs
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91717627 |
| Brand | Speedway Motors |
| Thread Pitch | 3/8" NPT |
| Material Type | Aluminum |
| GENERAL | |
| Outside Diameter | 1.50" |
| Finish | Natural |
| Sold in Quantity | Each |
| Hose End Size | 1-1/2" |
4.8
15 Reviews
Customers appreciate this radiator hose adapter for its functionality and high-quality build. It has helped with projects ranging from repositioning the water temperature sender to adapting water lines in custom builds. While it is extremely beneficial for various applications, some users have noted the need for an additional ground for an in-line temp probe. In general, it is well-regarded for its practicality, perfect fit, and is noted for its easy installation and ability to solve specific issues normally unsolvable with off-the-shelf items. The product's competitive pricing is also highly appreciated.
4.8
15 reviews
5
13
4
1
3
1
2
0
1
0
Most Liked Positive Review
4.0
nicely made not complete
The adapter is used on a street rod to have an in line temp probe installed. Because it is connected to rubber radiator hoses there isn't a ground available to made the sensor work. A welded threaded tap next to the screw in fitting would solve the problem.
Most Liked Negative Review
3.0
good idea but not quit right
If it was 1 5/8" hose size it would have worked
Filter by Ratings
Great problem solver.
5.0
3 years ago
Bill
Dayton, Nv.
Verified
Worked perfectly.
Would Recommend
Yes, I would buy this product again
5.0
5 years ago
Franklin
Manchester NJ
Verified
I am relocating the water temperature sender lower in the cooling system.
Would Recommend
1-1/2" radiator hose connectorw/ 3/8" bung
5.0
6 years ago
Doc
Cleveland, Ohio
Verified
I'm using this in my upper radiator hose to allow air out as I fill the radiator.
Would Recommend
Yes, well made.
5.0
6 years ago
Ron
Bloomfield
Verified
This is perfect for the steam hose on my LS swap.
Would Recommend
What I needed
5.0
7 years ago
Chuck
Illinois
Verified
Good part, did what I wanted it to do.
Would Recommend
Easy install for temp gauge probe
5.0
8 years ago
Docchicago
Sugarloaf, CA
Verified
Used this off my radiator outlet to mount the temp probe for my temperature gauge. Perfect fit and easy access in case I decide to use it for the fan switch and mount the temp gauge off the head.
Would Recommend
Definitely a great product for a great price.
5.0
8 years ago
Edgar
Greenfield, CA
Verified
Product was great and just as pictured. Have an 98 mustang and the water temp sensor is notorious for going bad and needed this adapter to have my mechanical water temp gauge installed. The product was just as pictured and described.
Would Recommend
Very nice quality
5.0
8 years ago
00 prosix
Hampton Virginia
Verified
Nice quality part exactly what i needed for a temp senser on my race motor.
Would Recommend
Inline fill adapter with 3/8 NPT fitting
5.0
8 years ago
Vince
Brookpark Ohio
Verified
I'm going to use this for my temp gauge sending unit in the upper radiator hose. I'm running a 671 blower and the sending unit is in the back of the block where I don't trust the readings.
Would Recommend
Inline temperature port..or fill adapter
5.0
9 years ago
John
Gilbert
Verified
Nice quality part. Good value.
Would Recommend
Showing 10 of 15 reviews
Be the first to ask a question.
